Abstract:1. Srx(Zr0.9Y0.05Yb0.05)O1.95+x‐NiCoCrAlY thermal barrier coatings (TBCs) [SZYY‐1, x = 1.0; SZYY‐2, x = 0.9; SZYY‐3, x = 0.8] were deposited by suspension plasma spraying (SPS) using the corresponding precursors suspension prepared by co‐precipitation. 2. SPS‐SZYY‐2 with columnar crystal structure was found to have the highest number of 1121°C‐1 h high‐temperature thermal cycling, up to 345 times. 3. The effects of microstructure and phase composition on thermal cycling failure of the coating at high temperatures were studied in detail. A finite element model was also proposed to evaluate the thermal stress thermally grown oxide (TGO) morphology of a real coating at different thermal cycling stages. The thermal barrier coatings (TBCs) consisting of Srx(Zr0.9Y0.05Yb0.05)O1.95+x were prepared using the suspension plasma spraying (SPS) method. Precursor suspensions were prepared via co‐precipitation for this purpose. Detailed microstructural, phase composition, and phase content analyses were conducted on these coatings, designated as SZYY‐1 (x = 1.0), SZYY‐2 (x = 0.9), and SZYY‐3 (x = 0.8). Additionally, the coatings underwent a thermal cycling test at 1121°C for 1 h. To assess the morphology of thermally grown oxide (TGO) in a real coating, a finite element model was employed. SPS‐SZYY‐2 with columnar crystal structure was found to have the highest number of thermal cycling, up to 345 times. The thermophysical high‐temperature properties of the coating can be effectively improved through suitable second‐phase content. Microstructural and finite element analyses revealed that stress, primarily caused by the continuous growth of the Co3O4, NiO and Spinel (CNS) layer within TGO, was the predominant factor leading to coating failure. At elevated temperatures, transverse cracks formed at the interface between the bond coating and ceramic top coating due to mismatched thermal expansion and sintering effects, ultimately leading to coating degradation. Therefore, reducing the generation rate of large stresses in the coating, especially shear stresses, can effectively prevent the generation and propagation of transverse cracks and increase the thermal cycling life of TBCs.

Gradient Thermal Cycling Behavior of a Thermal Barrier Coating System Constituted by NiCoCrAlY Bond Coat and Pure Metastable Tetragonal Nano-4Ysz Top Coat

Thermal Cycling Behavior of Nanostructured and Conventional Yttria-Stabilized Zirconia Thermal Barrier Coatings Via Air Plasma Spray

Bonding and Thermal-Mechanical Property of Gradient NiCoCrAlY/YSZ Thermal Barrier Coatings with Millimeter Level Thickness

Study on the Microstructure Evolution of Nano and Micron-size Thermal Barrier Coatings during Thermal Cycling

Modification of NiCoCrAlY with Pt: Part II. Application in TBC with Pure Metastable Tetragonal (t′) Phase YSZ and Thermal Cycling Behavior

Thermal Cycling Performance of La2Ce2O7/YSZ TBCs with Pt/Dy Co-Doped NiAl Bond Coat on Single Crystal Superalloy

Study on Performance of 8YSZ Thick Gradient TBC

Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold Sprayed Nanostructured NiCrAlY Bond Coat

Interfacial failure induced by dynamic evolutional stress of NiCoCrAlY-4YSZ TBCs during gradient thermal cycling: Effect of 4YSZ top coat thickness

Microstructure and Thermal Cycling Behavior of Thermal Barrier Coating on Near-Α Titanium Alloy

Composite Structure of YSZ Embedded in NiCoCrAlTaY Bond Coat Induces Thin and Multilayered Al2O3 Film to Extend the Thermal Cycle Life of Thermal Barrier Coatings

Thermal properties of plasma-sprayed thermal barrier coating with bimodal structure

Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold-Sprayed Nanostructured NiCrAlY Bond Coat

Investigation of the failure mechanism of thermal barrier coatings prepared by electron beam physical vapor deposition

Thermal cycling behavior of Srx(Zr0.9Y0.05Yb0.05)O1.95+x thermal barrier coatings by suspension plasma spraying

Thermal Cycling Behavior of Thermal Barrier Coatings with HVOF NiCrAlY Bond Coat

Microstructural Design and Thermal Cycling Performance of a Novel Layer-Gradient Nanostructured Sc2O3–Y2O3 Co-Stabilized ZrO2 Thermal Barrier Coating

Thermal Barrier Coatings with (al2o3–y2o3)/(pt or Pt–Au) Composite Bond Coat and 8YSZ Top Coat on Ni-based Superalloy

Comparison of thermal cycling behavior of plasma-sprayed nanostructured and traditional thermal barrier coatings

Thermal cycling and interface bonding performance of single phase (Ni,Pt) Al coating with and without pure metastable tetragonal phase 4YSZ

Failure of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings System under Cyclic Thermo-Mechanical Loading with a Thermal Gradient