Abstract:Due to frequently occurred three-phase unbalanced loads in the ends of large number of branches in distribution networks, it is difficult to extract reflected wave of the fault point in the complex reflected and refracted waves using the traditional single-terminal traveling wave methods. Simultaneously the precision of the fault location methods based on the difference of wave velocity between zero-mode component and line-mode component of traveling waves and the one based on mutation of line-mode traveling wave are decided by the unstable zero-mode wave velocity. Therefore, a new approach is proposed by combining the above two methods to achieve higher efficiency and precision of measuring the fault distance and location. The presented method employs the correspondence between the detected zero-mode wave velocity and the fault distance to achieve the fault location algorithm which is not impacted by zero-mode wave velocity. The approach firstly detects difference of arrival time between the zero-mode traveling wave and line-mode traveling wave at the head end. And then post-injecting high voltage pulses into three phases simultaneously and detecting the arrival time of the first line-mode traveling wave head at the head end of the transmission line. Following, it employs the stable line-mode wave velocity to execute the measurement of the fault distance. Finally, PSCAD-based simulation shows that the absolute errors of this algorithm are less than 100 m in all cases, without influence from the fault location, grounding resistance and fault initial phase angle.

New accurate fault location algorithm for series compensated lines using synchronous data

A NEW ACCURATE TWO-TERMINAL LOCATING ALGORITHM FOR SERIES COMPENSATED LINE

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

An Adaptive Fault Location Algorithm Based on PMU Measurement for Series Compensated Transmission Lines

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

A New Fault Location Algorithm Using Asynchronized Two-Terminal Data

New Accurate Fault Location Algorithm for Faults Between Two Lines of Double-Circuit Transmission Line Based on Differential Network

A Fault Location Algorithm for Multi-Section Combined Transmission Lines Considering Unsynchronized Sampling

Novel Fault Locating Method Based on Synchronized Voltage Phasor

Fault Locating Algorithm for T-type Transmission Lines with Asynchronous Sampling

An Accurate Fault Location Algorithm for Parallel Transmission Lines Using One-Terminal Data

New Algorithm for 2-terminal Transmission Line Fault Location Integrating Voltage Phasor Feature and Phase Angle Jump Checking

Fault Location for Three-Terminal Transmission Lines Using Fault Voltage Sequence Components

Accurate fault location algorithm for transmission lines based on R-L model parameter identification

Transmission Line Fault Location Based on Improved Algorithm of Electromagnetic Time Reversal

A single-terminal fault location algorithm in distribution network for eliminating the effect of the velocity of zero-mode traveling wave

Fault Location Algorithm Without Parameter Synchronization of Both Terminals

Flexible Synchronized Measurement Technology-Based Fault Locator

Fault Location of Hybrid Three-Terminal HVDC Transmission Line Based on Improved LMD

A New Method for Identifying the Fault Location on Series Compensated Lines Based on Transient Fault Information

Fault Location Algorithms for Parallel Transmission Lines Using Two Terminals Nonsynchronized Current Data