Abstract:Yttrium-doped Ba0.6Sr0.4TiO3 thin films with different thickness (related with layer number of BST films) were prepared by Sol-gel method. The influence of thickness on structure and dielectric properties of the films were studied. Atomic force microscope shows that Y-doped BST films can improve the surface morphologies obviously, which is strongly related to film thickness. When the thickness is appropriate (the layer number is 8), the grain is smaller, denser and more homogeneous; the grain boundary is clear. However, X-ray diffraction pattern presents that the Y-doped BST films reveal perovskite structure and grow mainly along (110) orientation. With the increase of thickness, the diffraction intensity of (110) peak first increases and then decreases, which indicates that phase structure is related to the film thickness. The Y-doped BST films show markedly improved dielectric properties related to film thickness. When the thickness increases, the capacitance or the dielectric constant decreases. The film with 8 layers shows the best dielectric properties. The capacitance is 17.8 pF (the dielectric constant is 130) and the dielectric loss (tan delta) is 0.0057 at zero bias. The tunability can reach 32% and the figure of merit is 56. The Y-doped BST thin films with above marked performance can satisfy the requirements of microwave tuning device. The related mechanism was also analyzed.

A Modified Sol-Gel Coating Method for BST Thick Films on Silicon Substrates

Fabrication of organic PVP doping-based Ba 0.5Sr 0.5TiO 3 thick films on silicon substrates for MEMS applications

Determination Of Refractive Indices And Thicknesses Of Ba0.7sr0.3tio3 Films With And Without Mgo (001) Buffer Layer On Silicon Substrate

Preparation and Dielectric Properties of BST Films Deposited on Ti5Si3 Electrode Layer

Influence of additive on morphologies of barium strontium titanate films

Fabrication Of Ba0.6sr0.4tio3 Ceramic Thick Film By Electrophoretic Deposition Process

Surface Structures and Dielectric Properties of Polyvinyl Pyrrolidone-added Ba0.6Sr0.4TiO3 Films Prepared by Improved Sol-gel Method

Bst Patterned Films Prepared by Direct Patterning Process and Their Properties

THE SURFACE MORPHOLOGY OF Ba0.65Sr0.35TiO3 THIN FILM BY SOL-GEL METHOD

Low Temperature Preparation of Baxsr1-Xtio3 Thin Films Prepared by Sol-Gel-Hydrothermal Method

Characteristics of silicon-based BaxSr1-xTiO3 thin films prepared by a sol-gel method

Fabrication of BST Films by Electrophoretic Deposition from Nano-Scaled (ba,sr)tio3 Synthesized by Different Methods

Microstructure And Electrical Properties Of (Ba,Sr)Tio3 Thin Films Prepared By A Sol-Gel Method

The Diffusion of Pt in BST Films on Pt/Ti/SiO 2 /si Substrate by Sol-Gel Method

Synthesis and Microstructure of Barium Bismuth Titanate Thin Films Using a Sol-Gel Technique

Characterization Of Mn-Doped Ba1-Xsrxtio3 Thin Films Prepared By The Sol-Gel Method

Fabrication and Characteristics of La, Cd and Sn Doped BST Thin Films by Sol–gel Method

Progress in Crystallization Behaviors of Barium Strontium Titanate Thin Films Prepared by a Sol-gel Process

Textured BST Thin Film on Silicon Substrate: Preparation and Its Applications for High Frequency Tunable Devices

Effect of Film Thickness on Structure and Dielectric Properties of Yttrium-Doped Ba0.6Sr0.4TiO3 Films

Surface Structures and Dielectric Properties of Yttrium-Doped Barium Strontium Titanate Films by Improved Sol-Gel Method