Abstract:The heat dissipation capacity and mechanical reliability of silicon nitride (Si3N4) ceramic substrates determine the service life of power devices. In this work, a two-step sintering method was designed to produce Si3N4 ceramics with excellent performance using Si and α-Si3N4 powders with different ratios as raw materials. The nitridation mechanism and the microstructural evolution mechanism were clarified. The in-situ-generated β-Si3N4 seeds regulated the microstructure of the post-sintered Si3N4 ceramics. The introduction of Si powder reduced the content of oxygen impurities and regulated the microstructure of Si3N4 ceramics, thereby improving thermal conductivity while maintaining excellent mechanical properties. When the mass ratio of Si powder nitridation to α-Si3N4 was 0.75, its thermal conductivity was 120W·m-1·K-1, fracture toughness was 11.92±0.36MPa·m1/2, and bending strength was 712±20.6MPa. This study provides a strategy to reduce the introduction of oxygen impurities while optimizing the microstructure to prepare Si3N4 ceramics with excellent performance.

PREPARING Si3N4 CERAMICS WITH HIGH PERFORMANCE BY GELCASTING (II)-INFLUENCE OF CIP, POWDER OXIDIZATION AND GPS SCHEME ON PROPERTIES OF THE MATERIALS

PREPARING Si3N4 CERAMICS WITH HIGH PERFORMANCES BY GELCASTING (I)INFLUENCE OF COATING Si3N4 POWDER ON MECHANICAL PROPERTIES OF THE MATERIAL

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Preparation of Si3n4 Ceramics with High Strength and High Reliability Via A Processing Strategy

Microstructure and Properties of Si3N4 Based on Gelcasting

PREPARATION OF POROUS Si_3N_4 NANOCOMPOSITES BY GELCASTING

Microstructure and Properties of Porous Si3N4 Ceramics Fabricated by Gelcasting

Preparation of <i>In Situ</i> Synthesized SiC Particles Reinforced Highly Porous Si<sub>3</sub>N<sub>4</sub> Ceramics by Gel-Casting

Preparation of in-situ synthesized SiC particles reinforced highly porous Si3N4 ceramics by gel-casting

Study on the Process of Si3N4 Ceramic with High Properties by Gel-casting

Preparation of High Concentrated Suspension and Gelcasting Process for Silicon Nitride Bonded Silicon Carbide Refractories

Influence of fabricated process on mechanical properties of porous SiC-particle/ Si3N4 composites

Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosity and High Strength

Study on Gelcasting of Silicon Nitride-Bonded Silicon Carbide Refractories

Processing, Microstructures and Mechanical Properties of Aqueous Gelcasted and Solid-State-Sintered Porous Sic Ceramics

Aqueous Gelcasting of ZrB2–SiC Ultra High Temperature Ceramics

Mechanical and dielectric properties of gelcasted Si 3N 4 porous ceramic using CaHPO 4 as an additive

Preparation and study of porous Si3N4 ceramics with high strength

Gelcasting Preparation of Porous Silicon Nitride Ceramics by Adjusting the Content of Monomers

Preparation And Properties Of High Strength Porous Si3n4 Ceramics

Preparation and Properties of Micro porous Si3N4 Ceramics by Gelcasting