Abstract:Journal of Composite Materials, Ahead of Print. An attempt was made to map the distribution of stress in fibrous composites with imperfect bonding. Two analytical micro-mechanics models were developed. In the first model, the composite was subjected to axial tensile loading, parallel to the fiber direction, and the assumption of iso-strain was employed to derive the control equations. In the second model, the composite was loaded in the direction transverse to the fiber. An iso-stress condition was employed, and Airy stress function was utilized to articulate the stress and displacement equations. An assumption of how the stress is transferred between the matrix and the fiber was introduced in both models. To investigate and validate the models, specimens were fabricated using a carbon plain weave fabric and a geopolymer matrix. Single fiber pullout and three-point bending tests were carried out. The maximum average tensile stress obtained from the three-point bending tests, as well as the mechanical properties of the fiber and geopolymer, served as input for the models. Results indicate that the effect of the level of bonding is very high in the transverse direction while almost negligible in the axial direction. The difference in the maximum value of the axial tensile stress at the fiber-matrix interface was used to calculate the numerical value of the interfacial shear strength, and the numerical result matched the data obtained from the single fiber pullout test.

Effect of thermal residual stresses on yielding behavior under tensile or compressive loading of short fiber reinforced metal matrix composite

Mechanical behavior of a fiber end in short fiber reinforced composites

Pretension-Dependent Residual Stress of Alumina Fiber-Reinforced Composite Wire

A Study of the Residual Stress and Its Influence on Tensile Behaviors of Fiber-Reinforced Sic/Al Composite

Investigation of elastic modulus and morphology of reinforcement phase on the stress distribution of copper matrix composites

Initial Damage Induced by Thermal Residual Stress and Microscopic Failure Analysis of Carbon-Fiber Reinforced Composite under Shear Loading

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Multi-Scale Modeling and Damage Analysis of Composite with Thermal Residual Stress

The Effect of Thermal Residual Stress on the Stress State in a Short-Fiber Reinforced Thermoplastic

A Microscale Analysis of Thermal Residual Stresses in Composites with Different Ply Orientations

The effect of imperfect bonding on stress distribution in fibrous composites

Multiscale Thermomechanical Modeling of Short Fiber-Reinforced Composites

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

Experimental and Numerical Study of the Interfacial Shear Strength in Carbon Fiber/Epoxy Resin Composite under Thermal Loads

Finite Element Analysis of Residual Stress Distribution Patterns of Prestressed Composites Considering Interphases

Micromechanical analysis of stochastic fiber/matrix interface strength effect on transverse tensile property of fiber reinforced composites

A cohesive zone model for the elevated temperature interfacial debonding and frictional sliding behavior

Analysis Of The Thermo-Residual Stress In Production On Fiber Reinforced Aluminum Matrix Composites

Analytical Investigation of Thermomechanical Stresses in Graded Interphase Between the Fiber and the Matrix

Numerical Analysis of the Effects of Reinforcing Particles on the Residual Stress of TiB2/Al-Si Composites Fabricated by Laser Powder Bed Fusion