Abstract:The method for designing diffractive microlens with micro-nano-scale structural features, through iterative angular spectrum algorithm, and fabricating diffractive microlens by single-step photolithography and a wet etching process, based on standard micro-nano-technology, was presented. Surface morphology testing shows that the diffractive microlens fabricated is composed of multi-step continuous relief structures with the feature height in the micrometer range, the distribution of the surface micro-nano-structures is circular symmetry, and the transition between the circular rings is smooth. A large number of fine structures with micro-nano-scale features can be clearly observed in the scanning electron microscope on the surface of the diffractive microlens. Surface roughness data tested shows that the surface roughness of fabricated diffractive microlens is in the nanometer range, which has reached the level of optical mirror. The optical aperture is in the micrometer range. The characteristics of the micro-structures on the surface and the optical aperture can be set and arranged flexibly by the iterative angular spectrum algorithm, according to the characteristics and parameters of the incident and outgoing beam. The results of optical characteristics measurement show that the diffractive microlens can focus incident red laser into a very small bright focal spot, and the phenomenon of focusing and defocusing is obvious. The analysis of beam quality shows that the intensity distribution and size of the focal-spot is in accord with pre-calculated results. The fabricated diffractive microlens indicates a very high diffraction efficiency. The experimental results demonstrate that the performances of the diffractive microlens can be further improved by modifying the design algorithm and optimizing the manufacture craft.

A Gray-Scale Mask Fabrication System For Diffractive Micro Optics

Grayscale Expanding For System Of Digital Mask Fabrication

Research On A New Approach For The Fabrication Of Diffractive Optical Elements By Means Of Rotating Digital Mask

Algorithm Optimization and Mask Data Generating for Dammann Gratings in Laser Medical Applications

Virtual gray-scale mask for fabrication of micro-optical elements via focused ion beam direct writing

Two-Dimensional Grating Fabrication Based on Ultra-Precision Laser Direct Writing System

Refined Grating Fabrication Using Displacement Talbot Lithography

Simulation of Doe Fabrication Using Dmd-Based Gray-Tone Lithography

A novel design for maskless direct laser writing nanolithography: Combination of diffractive optical element and nonlinear absorption inorganic resists

Interference Lithography Based on a Phase Mask for the Fabrication of Diffraction Gratings

Mask-Moving-Lithography-Based High-Precision Surface Fabrication Method for Microlens Arrays

Source and Mask Co-Optimization Using A Gradient Based Method in Optical Lithography

Improving the Edge Profiles of Lithography Patterns Using Gray-Tone Technique in Digital Photolithography

Research on the Method of Fabricating DOE by Digital Lithography System with Mutipedots Scanning

Design and Fabrication of Diffractive Microlens and Analysis of Optical Characteristics

DMD-based Gray-tone Lithography for Fabrication of Continuous Profile Microstructure

Design and Simulation for the Bifocal Microlens in Thick Film Lithography

Optimize projected mask images for improving three-dimensional printing accuracy for digital light processing based vat photopolymerization

Optical microlithography on oblique and multiplane surfaces using diffractive phase masks

Genetic Algorithm-Based Optical Proximity Correction for DMD Maskless Lithography.

Gray-tone Lithography for Micro Opto-Device of Arbitrary 3D Shaped Surfaces