Design on pumped storage

Qi Wang.,Fulei Chu,Fuzhou Feng

2001-01-01

Abstract:The development of a condition monitoring, analysis and diagnosis system for the pumped storage unit at the Guangzhou pumped storage power station in China is described. The characteristics of the pumped storage unit are listed and the basic design principles are outlined. Details are given of the hardware and software, analysis module and diagnosis module.

What problem does this paper attempt to address?

Designs on pumped storage

Qingyu Wabg,Fulei Chu,Fuzhou Feng

2001-01-01

Abstract:Various design considerations were taken into account when devising a condition monitoring, analysis and diagnosis system for pumped storage power units. Qingyu Wang, Fulei Chu and Fuzhou Feng report.
Condition monitoring, analysis and diagnosis system of a 300 MW pumped storage power unit

Wei ZHANG,Fulei CHU,Zhensong ZHANG

DOI: https://doi.org/10.3321/j.issn:1000-0054.1998.04.028

1998-01-01

Abstract:A condition monitoring, analysis and diagnosis system for a 300 MW pumped storage generator unit is introduced. The purpose of developing this system is to provide suggestion for preventive maintenance. Structural parameters, operating characteristics and common faults of the unit are analyzed first. The hardware and sensors distribution of the system are discussed. Function modules and data flow-chart are given based on the user's requirements. Finally, its application to a unit is presented. The software is designed on the Windows-NT network platform. The system has been successfully put into operation.
Design of Infrastructure for Pumped Storage Power Station and Automatic Monitoring System Using Geographic Information System

Yang Wang,Binbin Wang,Tongyi Zhu

DOI: https://doi.org/10.1088/1742-6596/2083/2/022054

2021-11-01

Journal of Physics: Conference Series

Abstract:Abstract The pumped storage power station realizes grid connected power generation through the conversion between the potential energy of surface water and mechanical energy. It has become the strategic resource of UHV power grid with its low valley peak regulation and emergency standby function. The green basic design and design of the pumped storage power station needs systematic research. Based on the collaborative analysis method of production and ecological safety of storage disk, this paper takes Ninghai pumped storage power station as an example to carry out green infrastructure planning and design research. Through the comprehensive evaluation and analysis of construction land based on GIS, from the perspective of adaptability of power station construction to mountain creek pit environment, the function of horizontal layout is constructed in parallel and vertical layout, and a modular and distributed spatial structure of green infrastructure is constructed; Then, based on the continuous recycling of water resources, the monitoring and early warning system of power plant production ecological safety is constructed, which is “one water, two lines and three slopes”. It is hoped that the correlation between the production and the ecological dispatching of the storage tray can be found through the dynamic tracking of multiple factors and quantitative analysis of production cycle, which can provide reliable basis for timely mitigation of damage and formulation of compensation strategies, Scientific control of green infrastructure planning, design and construction.
The Application Of The Monitoring, Analysis, And Diagnosis System (Psta-I) In Guangzhou Pumped Storage Power Station (Gpsps)

Fz Feng,Fl Chu,Yy He,Guodan

2000-01-01

Abstract:PSTA-I is a system developed by Tsinghua University cooperated with Guangzhou Pumped Storage Power Station (GPSPS), which can help to monitor, alarm, analyze and diagnose the condition of turbine-generator units. It has been installed on No.1 unit of GPSPS for more than two years, and the system has been identified by the electrical power bureau of Guangdong Province, China. After installation, tremendous of data has been obtained from this system for analyzing. This paper is to introduce some analyzed results of the turbine with this system. In December 1998, during yearly maintenance work made for this turbine, according to the theoretical analysis results, some clearance of the tilting pad guide bearing has been adjusted, Comparing with the practical situation after adjusting the monitored data and the analyzed results are considered to be consistent. In order to introduce PSTA-I system more widely, the introduction part gives a brief description of the system; the second part gives out some examples of the unit recent condition after the data analyzed. Theoretical analyzed results shows that the mechanism of higher pad temperature in upper guide bearing is too large of the pre-load coefficient of the tilting pad bearing which is included in the third part. The end part summarizes the results after its adjustment.
Developments and characteristics of pumped storage power station in China

Y W Xu,J Yang

DOI: https://doi.org/10.1088/1755-1315/163/1/012089

2018-07-30

IOP Conference Series: Earth and Environmental Science

Abstract:Pumped-storage can quickly and flexibly respond to adjust the grid fluctuation and keep the grid stability because of its various functions. Besides, it is an effective power storing tool and now it has become the largest and most widely used energy storage form. Many countries configured a certain proportion of pumped storage power in the network to keep their grid stability. This paper introduces the current development status of the pumped storage power (PSP) station in some different countries based on their own economic demands and network characteristics. Then the evolutions of the pumped-storage power station in China are focus reviewed. To provide better technical support for future PSP development, the typical features of the PSP in plant design, construction, operations, and economic evaluation are described in detail compared with the conventional hydropower plant. The difficulties and challenges of the pumped storage technology faced in China are also summarized and the future development directions are prospected.
New Progress of Design and Setting of the Generator Transformer Protection for Qingyuan Pumped Storage Power Station

GUILin,WANGFeifei,WANGXiangheng

DOI: https://doi.org/10.3969/j.issn.1671-3893.2016.04.004

2016-01-01

Abstract:As Qingyuan pumped storage power station has already put into operation,it’s necessary to make a summary of the new advances in its design and settings of the generator-transformer unit protection Based on the comprehensive internal fault simulation and with consideration of the generator design and the instal ation of CT,the quantitative and optimization design of main protection for Qingyuan generator has been completed; By adding new trip-permitted current components, the ability of SIEMENS generator out-of-step protection to distinguish between out-of-step oscillation and stable oscil ation has been enhanced; When it comes to the protection settings of generator stator ground fault and low voltage side of main transformer ground fault,the change in generator’s capacitance and low voltage side of main transformer’s capacitance brought by GCB interrupting operation is taken into consideration. Above experiences can be used as a reference for the construction of pumped storage power station in the future.
Comprehensive Performance Evaluation Of Frequency Control Of Pumped Storage Units Based On Actual Operating Data Analysis

Yuhong Chang,Congxiao Yao,Min Wei,Lei Wang,Yan Luo

DOI: https://doi.org/10.1109/psgec51302.2021.9541580

2021-08-01

Abstract:As the "regulator" of the power system, the pumped storage power station has the advantages of flexible working condition conversion, fast adjustment speed, and short response time. Compared with thermal power units, pumped storage units participate in the primary frequency control(PFC) and secondary frequency control (Automatic Generation Control, AGC) more frequently. Learning from the "Implementation Rules for Auxiliary Service Management of Grid-connected Power Plants and Implementation Rules for Grid-connected Operation Management of Power Plants(Two Rules)"of the six major regional power systems in China, this article firstly establishes a comprehensive performance evaluation system of frequency control for pumped storage units; On this basis, we determine the weight of each index according to the unit's frequency control reserve capacity; Finally, based on the actual operating data of a pumped storage power station in North China, we use the TOPSIS evaluation method to evaluate the performance of PFC, the performance of AGC and the comprehensive performance of frequency control of each unit in the station, and compare the evaluation results.
The Application of Hydrogenerator Units Monitoring and Analysis System in Beijing SSL Pumped Storage Plant

ZHU Ying,WU Yu-lin,FAN Yu-lin,ZHENG Song-yuan

DOI: https://doi.org/10.3969/j.issn.1000-3983.2007.01.012

2007-01-01

Abstract:the units monitoring and analysis system which was used in Beijing SSL pumped storage plant including the components of the system,the measuring points and the characteristic of the system were introduced in this paper.This system recorded the data of the vibration and run-out before and after the repair,in order to check up the effect of the repair and provide the information to repair.After the repair,the PDA and oil chromatogram systems were installed on unit 3,all of these systems provide the information to decide whether the unit need repair.
The Pump-turbine Hydraulic Performance Research, Model Test and Operation in Yangjiang Pumped Storage Power Station

Yang Xiaolong,Wang Huanmao,Liu Ming,Wang Chao

DOI: https://doi.org/10.1088/1742-6596/2752/1/012074

2024-01-01

Journal of Physics Conference Series

Abstract:The Yangjiang Pumped Storage Power Station (PSP) is the largest unit rated output PSP that has been built in China, with a maximum water head of nearly 700m and a unit capacity of 400MW. The ultra high water head and its large range of the PSP means a significant difficulty during the dydraulic research and development of the pump-turbine. In this paper, it is introduced on model test and results in the EPFL and IWHR. It is studied on energy performance, cavitation, pressure pulsation and “S” characteristic of pump-turbine with splitter blade. The unit data analys after put into operaton indicat highly hydraulic stability and relative tiny vibration, which just verify the model test. As the model and prototype results show that Yangjiang pump-turbine is outstanding in various indexes and quite excellent in comprehensive hydaulic performance.
Research Progress of Pumped Storage Power Plant Application and Evaluation of Energy-saving and Emission Reduction

Shanshan He,Wei Li,Han Lu,Lingzhi Wang,Zhenyu Wang,Zejing Qiu

DOI: https://doi.org/10.13774/j.cnki.kjtb.2017.12.003

2017-01-01

Abstract:The stability and safety of renewable energy power generation cannot be guaranteed, resulting in waste of resources and irrational operation of power system. Fast start stop unit of peak shaving process, increasing the risk of accidents. Energy storage technology can alleviate the above problems, providing technical support for power system stability, economy, and environmental protection. As the large-scale energy storage tool, pumped storage develops rapidly in the field of power system planning in China. Summarizing the current application of pumped storage and the research of economic, energy saving and emission reduction, and proposing the existing problems and challenges. In order to meet the needs of the construction of global energy internet, should pay attention to the combination of life cycle assessment in the process of the planning of pumped storage and so on, also put forward views on the direction of future research.
Based on the Security Control of Pumped Storage Hydropower under Extreme Fault Conditions after Grid Connection

Qin Xiao,Zhidan Bai,Anan Zhang

DOI: https://doi.org/10.1088/1742-6596/2774/1/012006

2024-07-18

Journal of Physics Conference Series

Abstract:As an important part of the new energy grid connection, pumped storage hydropower plays an important role in black start, frequency modulation and phase modulation, peak shaving and valley filling, energy storage and accident reserve. In order to ensure the security and stability of the power system under extreme fault conditions after the pumped storage hydropower is connected to the grid, it is particularly important to configure reasonable security and stability control measures. Based on the development status and operation characteristics of pumped storage hydropower stations at home and abroad, considering the need of system security and stability control, this paper takes a pumped storage hydropower station in Southwest China as an example to simulate and analyze the transient characteristics of the pumped storage hydropower after grid connection. In view of the possible extreme fault conditions, a regional security control system is designed, and the configuration, control measures and strategies of the security control device on the pumping side are studied.
Air Pump Unit Online State Monitoring System

WANG Xiao-ping

DOI: https://doi.org/10.3969/j.issn.1000-3932.2001.01.009

2001-01-01

Abstract:The online state monitoring and control system of CMC-2 air pump unit is introduced.The monitoring principle,system structure,design method of hardware and software are discussed detailedly.It has very clear characteristics at the aspects of advantage and project practicability.The practice application shows that the monitoring data has provided the technology basis for device maintenance,overhaul,and replacing,and has effectively prevented some destructiveness bearing troubles.
Design and Application of Energy Management Integrated Monitoring System for Energy Storage Power Station

X Zhong,Y W Jiang,K Hou,W Cai,H Yin,J Liu,Q S Wang

DOI: https://doi.org/10.1088/1755-1315/701/1/012052

2021-03-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract According to the characteristics of huge data, high control precision and fast response speed of the energy storage station, the conventional monitoring technology can not meet the practical application requirements. In this paper, an integrated monitoring system for energy management of energy storage station is designed. The key technologies, such as multi-module integration technology, centralized energy management control technology, high concurrency group control technology based on IEC61850 and internal interaction mechanism based on User Datagram Protocol, are described in detail. Relying on the project site of Langli energy storage station, the secondary system architecture of the energy storage station is simplified, the stability of control operation and the fast response ability of power conversion system group are improved, and the reliability of output power of the energy storage station is guaranteed.
Condition Monitoring and Fault Diagnosis of Hydropower Station Units

Longyan Dai,R. Yu,Jialan Pan,Guorong Zhang

DOI: https://doi.org/10.25236/AJETS.020045

2019-08-23

Abstract:Since the 21st century, China has ushered in a new upsurge in hydropower energy development in large-scale river basin cascade hydropower. The hydropower station has the advantages of good regulation performance and flexible operation. It is the best frequency modulation and peak-shaving power supply. At the same time, the mutual compensation and adjustment between hydropower stations makes the utilization of electric energy more reliable, high-quality and economical, and has less environmental pollution. Therefore, the operation status monitoring and fault diagnosis of hydropower stations are an important guarantee for the safe and stable operation of hydropower stations. Real-time monitoring and fault diagnosis of the operation and deterioration laws of hydropower units can effectively avoid sudden failures and control the occurrence of gradual failures, thus reducing the maintenance cost of the unit and improving the life of the equipment and the efficiency of equipment operation.

Environmental Science,Engineering
Transient Analysis of a Multi-Unit Pumped Storage System During Load Rejection Process

Hao Zhang,Pengcheng Guo,Longgang Sun

DOI: https://doi.org/10.1016/j.renene.2019.12.111

IF: 8.7

2020-01-01

Renewable Energy

Abstract:Pumped storage systems are attractive for power generation and storage with the development of clean energy. The combined operating mode of wind energy, solar energy and pumped storage systems is an emerging form of energy production, which brings pumped storage systems challenge in transient operation. Here we innovatively present a transient model of a multi-unit pumped storage system by coupling hydraulic system with unit system. We demonstrate that the proposed model can reflect the coupling effect of units during transient process. The simulation is provided with one unit shutdown under three kinds of closing laws and another unit controlled by PID controller at rated condition. The dynamic responses of unit-1 head are negatively related with its flow and output. The fluctuation of the unit-2 head is always higher than that of unit-1, and their fluctuation periods are similar. Analysis of dynamic characteristics of the pumped storage system suggest that transient performance improvement can be achieved by changing the motion law of guide vanes. The influence of guide vanes on the transient performance of the pumped storage system is investigated during load rejection process and the results could enable the flexible operation of multi-unit pumped storage systems for renewable power generation.
Characteristic Analysis and Optimal Regulation of Primary Frequency Regulation Condition in Low Water Head Area Based on Hydraulic-Mechanical-Electrical Coupling Model of Pumped Storage Unit

Cong Lv,Yanhe Xu,Xin Wu,Qing Zhang

DOI: https://doi.org/10.1155/2020/6161784

IF: 2.3

2020-01-11

Complexity

Abstract:Pumped storage power station is an important regulating tool for peak load regulation and frequency regulation of the power grid, especially its primary frequency regulation function, which is of profound significance for the safety and stability of the power grid. As the core equipment of the pumped storage power station, the reversible design of the pump turbine makes it easy to have hydraulic fluctuation and mechanical instability when the unit runs to the “S” characteristic area, which will cause the frequency oscillation of the generator under the condition of primary frequency regulation. Therefore, some innovative work is studied in this paper: (1) an accurate hydraulic-mechanical-electrical coupling system mathematical model of pumped storage unit regulation system (PSURS) is established based on full characteristic curve of the pump turbine and seventh-order synchronous generator and excitation system; (2) the dynamic response characteristics of primary frequency regulation of pumped storage unit (PSU) under different water heads and different frequency disturbances are analyzed by numerical simulation; (3) in view of the unstable condition of the unit under the large frequency disturbance when it operates in the low head and small load area, the objective optimization function considering the ITAE index of hydraulic, mechanical, and electrical factors is proposed; and (4) fractional-order PID controller and the bacterial-foraging chemotaxis gravitational search algorithm (BCGSA) combined optimization strategy is used for PSURS optimization regulation and parameter optimization. The results show that the joint optimization strategy proposed in this paper has smaller objective function value, and makes the PSURS pass through the unbalanced area quickly, with better primary frequency regulation speed and smaller regulation depth.

mathematics, interdisciplinary applications,multidisciplinary sciences
High fidelity modeling of pumped storage units for optimal operation of a multi-energy co-generation system

Ganggang Liang,Hao Zhang,Chenxi Li,Xin Wu,Pengcheng Guo,Haipeng Nan

DOI: https://doi.org/10.1016/j.jclepro.2024.140773

IF: 11.1

2024-01-18

Journal of Cleaner Production

Abstract:Pumped storage, as the storage technology with the largest installed capacity and mature technology, plays a key regulation role in the multi-energy co-generation system. The core of regulation accuracy is the high-fidelity modeling of pumped storage. This paper improves the insufficiency of the conventional pumped storage model (CPSM) in exaggerating the flexibility of pumped storage units by setting up non-operable operating condition regions, and incorporates the condition switching loss into the model consideration, on the basis of which a high fidelity pumped storage model (HFPSM) is established. Secondly, a multi-objective function of the operation model is set from the consideration of economy, environmental protection and stability, and a engineering application level optimal operation model of wind power-photovoltaic-thermal power-pumped storage multi-energy co-generation system based on HFPSM is proposed. Thirdly, two research indicators, the thermal power volatility indicator and the pumped storage unit utilization rate, are proposed. Fourthly, combined with examples, the effects of CPSM and HFPSM on the optimized operation of the system are investigated. It is found that adding four 50MW pumped storage units to the system can reduce the total operating cost by 10.34% and the environmental cost by 83.61%. The optimisation of the high fidelity model is better under the premise of ensuring safe, stable and efficient operation of the system. Optimizing the number of unit startups and shutdowns for the high fidelity model to 25.8% of the conventional model. Finally, by exploring the optimal operation of a multi-energy co-generation system with different pumped storage installed capacities, it is found that the proposed high fidelity model makes the optimization results more in line with the actual operation. The flexibility of the pumped storage units no longer increases with the increase of installed capacity, which provides a reference for the planning of the storage capacity in the multi-energy co-generation system.

environmental sciences,green & sustainable science & technology,engineering, environmental
Overview of the Development and Current Status of Pumped Storage Power Plants

Zheng Wentao

DOI: https://doi.org/10.9734/jerr/2024/v26i81251

2024-08-13

Journal of Engineering Research and Reports

Abstract:Industrialisation and overexploitation of forest resources have led to environmental crises, including climate warming and a sharp decline in biodiversity. To address these challenges, the world is actively pursuing carbon neutrality and carbon peaking. As the cornerstone of clean energy storage and conversion, pumped storage power plants have undergone a century of technological innovation, from reliance on manual labour to highly mechanised TBM construction, which has significantly improved construction efficiency and quality. However, the application of TBM in pumped storage power plant construction still faces many challenges. In the future, we will conduct in-depth research on the design and application of modularisation, standardisation and intelligence to overcome the existing challenges and promote the extensive and efficient development of pumped storage power plant construction.
Development and Prospect of the Pumped Hydro Energy Stations in China

B S Zhu,Z Ma

DOI: https://doi.org/10.1088/1742-6596/1369/1/012018

2019-11-01

Journal of Physics: Conference Series

Abstract:Abstract Pumped hydro energy storage (PHES) has been recognized as the only widely adopted utility-scale electricity storage technology in the world. It is able to play an important role in load regulation, frequency and phase modulation and black starts in power systems. Due to its outstanding functions, this technology has been widely used worldwide. This paper introduces PHES including its functions and the technologies briefly to supply a comprehensive cognition of this technology. The key technologies of PHES, such as design and manufacture of reversible pump-turbine runners, design of heavy-duty thrust bearings and shaft sealings, startup of unit etc., are important for the PHES. In addition, more and more new technologies, such as operation with seawater, underground lower reservoirs, adjustable speed units etc., were put forward and used in PHES to make it perform better. This paper focuses on the development of PHES in China. Thanks to a rapid development of China’s economy in the recent years, PHES has gained a fast development. At present, China has owned the biggest installed capacity (29.9 GW by the end of 2018) of PHES the world. PHES has been an indispensable part of the power grid to increase the stability of the grid and improve the penetration of sustainable energy such as wind power, solar energy etc. With the employment of new technologies. China’s new PHES stations, such as Guangzhou, Tianhuangping, Xilongchi PEHS etc., have become the representatives of the world’s most advanced level. Based on the requirement of the current power grid for PHES, some new PHES have been under construction and more PHES are in the planning and design stage.
Unified Paradigm of Start-Up Strategy for Pumped Storage Hydropower Stations: Variable Universe Fuzzy PID Controller and Integrated Operation Optimization

Baonan Liu,Mengyao Li,Yuan Yuan,Jie Liu

DOI: https://doi.org/10.3390/en17133293

IF: 3.2

2024-07-05

Energies

Abstract:A pumped storage unit is a crucial guarantee in the pursuit of increased clean energy, especially in the progressively severe circumstances of low energy utilization and poor coordination of the integration of volatile renewable energy. However, due to their bidirectional operation design, pumped turbines possess an S-characteristic attribution, wherein the unsteady phenomena of unit vibration, pressure pulsation, and cavitation erosion happen during the start-up process and greatly impact the stable connection to the power grid. Therefore, a systematic study concentrating on an optimal unified paradigm of a start-up strategy for a pumped storage plant is conducted. Model construction, effective analysis, controller design, and collaborative optimization are sequentially expounded. Firstly, a refined start-up nonlinear model of a pumped storage plant with complex boundary conditions is constructed, wherein the delay time of frequency measurement, saturation, and dead zone features are comprehensively taken account. Furthermore, a variable universe fuzzy PID controller and its operation laws are proposed and specifically designed for the speed governing system of the pumped storage plant; the control quality and anti-disturbance performance are verified by a no-load frequency disturbance experiment. On this basis, taking speed overshoot for stationarity and speed rising time for rapidity, a novel open–close loop collaborative fuzzy control strategy is proposed with rotational speed feedback and a variable universe fuzzy PID control. The experiment results show that the proposed unified paradigm has better control performance in various performance indexes, and more balanced control quality and dynamic performance under various complex start-up conditions, which has great application value for ensuring the unit's timely response to the power grid regulation task and improving the operating stability of the power system.

energy & fuels

Design on pumped storage

Designs on pumped storage

Condition monitoring, analysis and diagnosis system of a 300 MW pumped storage power unit

Design of Infrastructure for Pumped Storage Power Station and Automatic Monitoring System Using Geographic Information System

The Application Of The Monitoring, Analysis, And Diagnosis System (Psta-I) In Guangzhou Pumped Storage Power Station (Gpsps)

Developments and characteristics of pumped storage power station in China

New Progress of Design and Setting of the Generator Transformer Protection for Qingyuan Pumped Storage Power Station

Comprehensive Performance Evaluation Of Frequency Control Of Pumped Storage Units Based On Actual Operating Data Analysis

The Application of Hydrogenerator Units Monitoring and Analysis System in Beijing SSL Pumped Storage Plant

The Pump-turbine Hydraulic Performance Research, Model Test and Operation in Yangjiang Pumped Storage Power Station

Research Progress of Pumped Storage Power Plant Application and Evaluation of Energy-saving and Emission Reduction

Based on the Security Control of Pumped Storage Hydropower under Extreme Fault Conditions after Grid Connection

Air Pump Unit Online State Monitoring System

Design and Application of Energy Management Integrated Monitoring System for Energy Storage Power Station

Condition Monitoring and Fault Diagnosis of Hydropower Station Units

Transient Analysis of a Multi-Unit Pumped Storage System During Load Rejection Process

Characteristic Analysis and Optimal Regulation of Primary Frequency Regulation Condition in Low Water Head Area Based on Hydraulic-Mechanical-Electrical Coupling Model of Pumped Storage Unit

High fidelity modeling of pumped storage units for optimal operation of a multi-energy co-generation system

Overview of the Development and Current Status of Pumped Storage Power Plants

Development and Prospect of the Pumped Hydro Energy Stations in China

Unified Paradigm of Start-Up Strategy for Pumped Storage Hydropower Stations: Variable Universe Fuzzy PID Controller and Integrated Operation Optimization