Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Base-frequency Clock Recovery from Non-uniform Optical Signal Pulses

A Novel All-Optical Clock Recovery Experiment for Extracting Clock Signal from OTDM Signal

All-optical Subharmonic Clock Recovery Using an Injected Mode-locked Fiber Ring Laser

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

A Simple Method for Clock Recovery

40 Gb/s Clock Recovery Based on Optical Phase-Locked Loop

A novel approach for clock recovery without pattern effect from degraded signal

Time-lens Based Optoelectronic Oscillator for Simultaneous Clock Recovery and Demultiplexing of OTDM Signal

Influence Factors of an All-Optical Recovered Clock from Two-Section Dfb Lasers

Optoelectrical Clock Recovery with Dispersion Monitoring for High Speed Transmission

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

100 Gb/s All-Optical Clock Recovery Based on a Monolithic Dual-Mode DBR Laser

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier

100-Ghz All-Optical Clock Recovery with Fabry-Perot Cavity and Semiconductor Optical Amplifier

Dual-wavelength clock recovery with simultaneous fourfold demultiplexing using an optoelectronic oscillator

All-optical Clock Recovery Using Parallel Ridge-Width Varied DFB Lasers Integrated with Y-branch Waveguide Coupler

Simultaneous Prescaled and Frequency-Doubled Clock Recovery Using an Injection-Locked Optoelectronic Oscillator

Effective Optical Clock Recovery and Simultaneous Fourfold Demultiplexing of Otdm Signal Using an Optoelectonic Oscillator

Short Pulsewidth Clock Recovery at 100 GHz Using Fabry-Perot Cavity and Semiconductor Optical Amplifiers

Low-timing-jitter all-optical clock recovery for 40 Gbits/s RZ-DPSK and NRZ-DPSK signals using a passively mode-locked quantum-dot Fabry-Perot semiconductor laser