Abstract:In this paper, tin doped indium oxide (ITO) films with high transparency and conductivity were fabricated on quartz by sol-gel method. The effect of four kinds of annealing atmospheres on the microstructure, morphology, surface chemical composition and optical-electrical properties has been investigated. Results show that the microstructure and morphology of the ITO films does not change much after heat treatment under different atmospheres. All annealed samples have the cubic bixbyite crystal structure of In2O3, with fine and uniformly distributed grains. The average grain size of each sample is approximately 10 nm. However, a noticeable dependence on the type of atmosphere is observed for oxygen vacancies and surface oxygen desorption. Different from oxidizing atmosphere, reducing or inert atmosphere is conducive to the formation of oxygen vacancies and desorption of adsorbed oxygen. Oxygen vacancies can effectively increase the carrier concentration of ITO. Oxygen desorption cannot only increase the carrier concentration, but also improve the carrier mobility. The issue for low conductivity of ITO nanocrystalline films can be solved by annealing in reducing atmosphere. This method can effectively control the grain growth and the chemical state of surface oxygen. The resistivity, average transmittance and Haacke FOM of the optimized ITO coated glass are 1.75 × 10−4 Ω cm, 88% and 0.0398 Ω−1, respectively.

Role of Ozone in Preparing Transparent Conductive IMO Films at Low Temperature by Thermal Reactive Evaporation

Low Resistivity Transparent Conducting CdO Thin Films Deposited by DC Reactive Magnetron Sputtering at Room Temperature

A new transparent conductive thin film In2O3:Mo

Molybdenum-doped Indium Oxide Transparent Conductive Thin Films

Transparent conductive In2O3:Mo thin films prepared by reactive direct current magnetron sputtering at room temperature

Properties of Transparent Conductive In2o3 : Mo Thin Films Deposited by Channel Spark Ablation

Transparent electric conductive films for optoelectronic devices

Growth of High Mobility Transparent Conducting In2O3:Mo Thin Film

Preparation of Molybdenum-Doped Indium Oxide Thin Films Using Reactive Direct-Current Magnetron Sputtering

Growth of In2O3:Mo Thin Films by DC Reactive Magnetron Sputtering at Room Temperature

Transparent conductive F-doped SnO 2 films prepared by RF reactive magnetron sputtering at low substrate temperature

Electrical and Optical properties of ITO Films Prepared by Ion-Assisted Deposition at Ambient Substrate Temperatures

Transparent Conductive Indium Zinc Oxide Films Prepared by Pulsed Plasma Deposition

The Electrical and Optical Properties of Molybdenum-Doped Indium Oxide Films Grown at Room Temperature from Metallic Target

In 2 O 3 透明薄膜晶体管的制备及其电学性能的研究

Effect of Film Thickness on Properties of Al-Doped Zno Film As Transparent Conducting Electrodes in Oleds

Fabrication and performance of indium oxide based transparent thin film transistors

Low-Temperature Fabrication of Fully Transparent Igzo Thin Film Transistors on Glass Substrate

The key of ITO films with high transparency and conductivity: Grain size and surface chemical composition

Novel transparent conductive films In2O3:Mo

Transparent conducting molybdenum-doped zinc oxide films deposited by RF magnetron sputtering