Abstract:A high-performance micromachined piezoresistive accelerometer, consisting of two axially stressed tiny beams combined with a central supporting cantilever, is developed for both much higher sensitivity and much broader bandwidth compared with conventional beam-mass piezoresistive accelerometers. With the pure axial-deformation scheme of the tiny beams, the developed accelerometer shows improvements in both sensitivity and resonant frequency. An analytic model is established for the pure axial-deformation condition of the tiny beams by adjusting the distance between the tiny beams and the central supporting cantilever. The specifications of the device, such as sensitivity and resonant frequency etc, are theoretically calculated. The analytic model is verified by using simulation of the finite element method (FEM), resulting in satisfactory agreement. Based on a figure of merit (the product of the sensitivity and the square of the resonant frequency), optimized design rules are obtained for the sensors of various measure-ranges from 0.25g to 25 000g. The accelerometers are fabricated by using silicon bulk micromachining technology. The formed 2.5g devices are characterized with a typical sensitivity of 106 mV/5 V/g and first mode resonant frequency of 1115 Hz. The testing results agree well with the design, thereby verifying the high performance of the proposed accelerometer. The developed sensors with the axially stressed tiny-beam scheme show obviously improved specifications, compared with previously published results.

An optimized micromachined convective accelerometer with no proof mass

Thermal optimization on micromachined convective accelerometer

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

A Low-Power and Robust Micromachined Thermal Convective Accelerometer

Micromachined Accelerometers with Sub-µg/√Hz Noise Floor: A Review

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A Compact Micromachined Interferometric Accelerometer Based on the Diffraction Grating

Micromachined Accelerometers with Sub-g/Hz Noise Floor: A Review

Performance of a Sensitive Micromachined Accelerometer with an Electrostatically Suspended Proof Mass

A Sensitive Three-Axis Micromachined Accelerometer Based on an Electrostatically Suspended Proof Mass

Fabrication and Characterization of a MEMS Thermal Convective Accelerometer on Silicon-in-Glass Substrate

A micromachined resonant accelerometer

Experimental Study of A Low-G Micromachined Electrostatically Suspended Accelerometer for Space Applications

A microchip optomechanical accelerometer

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

A Temperature-Insensitive Micromachined Resonant Accelerometer with Thermal Stress Isolation

Design and Test of a Micromachined Resonant Accelerometer with High Scale Factor and Low Noise

A Micromechanical Structure Eliminating Lateral Effect of Silicon Accelerometer

High-Performance Single-Side Fabricated (111)-Silicon Dual-Cantilever Accelerometer with Squeeze-Film Air Damping Modulation

A High-Performance MEMS Accelerometer with an Improved TGV Process of Low Cost