Abstract:This paper describes the design and experimental evaluation of a silicon micromachined resonant accelerometer with high scale factor and low temperature drift. The device was fabricated by bulk micromachining and sealed in a hermetic metallic package to ensure the resonator operates with high Q-factor. By optimizing the structure, the scale factor of the resonant accelerometer was increased to 361 Hz/g, which is close to the simulated result of 336 Hz/g taking into account the measurement range of +/- 14g. The bias-temperature drift coefficient fell to 4.4 mu g/degrees C. A digital frequency readout was implemented using a continuous time stamping method. The measured relative resolution within the operating frequency range of the resonator was better than 1.8 ppb at 1 Hz data update rate. Thus, we have produced a miniaturized resonator accelerator without the bulky commercial frequency counters used in our previous work. A test chamber at a constant temperature varying by only +/- 0.01 degrees C was used to characterize the temperature drift of the accelerometer prototypes by isolating the disturbances due to the ambient temperature. After increasing the scale factor and decreasing the temperature sensitivity, the 3-day bias stability was measured to be 2.19 mu g and 0.51 mu g for room-temperature and constant-temperature operations, respectively. Furthermore, the long-term bias stability was 1.77 mu g in 30-day measurements when the temperature variations were controlled to be within +/- 0.01 degrees C. The experimental results indicate that this resonant accelerometer exhibits excellent long-term temperature stability, which offers the promise for high-performance shipborne inertial navigation applications. (C) 2019 Published by Elsevier B.V.

Design and Test of a Micromachined Resonant Accelerometer with High Scale Factor and Low Noise

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Micromachined Accelerometers with Sub-µg/√Hz Noise Floor: A Review

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Micromachined Accelerometers with Sub-g/Hz Noise Floor: A Review

Low-Noise Drive of a Micromachined Resonant Accelerometer with Separated Sensing and Actuation

Design Of A High-Sensitivity Micromechanical Resonant Accelerometer With A Two-Stage Microlever

Microelectromechanical Resonant Accelerometer Designed with a High Sensitivity.

A micromachined silicon resonant accelerometer

Design and analysis of micromechanical resonant accelerometer

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Bulk-Micromachined Silicon Resonant Accelerometer

A micromachined resonant accelerometer

Critical Technologies in Design of Micromechanical Resonant Accelerometer

A Sensitive Micromachined Resonant Accelerometer for Moving-Base Gravimetry

A Novel Silicon Micromachined Resonant Accelerometer

Temperature-drift Characterization of a Micromachined Resonant Accelerometer with a Low-Noise Frequency Readout

A Resonant Accelerometer and Its Design

Design and simulations of a new biaxial silicon resonant micro-accelerometer

Design and Simulations of a Resonant Accelerometer

Design, Fabrication, and Characterization of a High-Performance Monolithic Triaxial Piezoresistive High-g Accelerometer