Abstract:It is well known that the structural problem between the autothermal operation and the outside utilization of heat in the catalytic combustion system and the runaway on catalyst bed is hard to avoid during the combustion process. Herein, the encapsulated Co3O4/(SiAl@Al2O3) thermal storage functional catalysts which couple Co3O4 catalysts and SiAl@Al2O3 phase change materials are proposed and firstly applied for catalytic combustion of lean methane to improve the thermal environment of the catalyst bed and achieve the high efficiency of lean methane utilization. The thermal management behaviors of such thermal storage functional catalysts and the dynamic coupling effect between heat storage/release characteristics of catalysts and catalytic performance during methane combustion process are investigated in detail. It is found that the encapsulated Co3O4/(SiAl@Al2O3) thermal storage catalysts retain the high latent heat of SiAl@Al2O3 phase change material (410 J/g) and the values vary from 280 J/g to 30 J/g when the SiAl@Al2O3 content decreases from 90 wt% to 10 wt%. When applying the catalysts to catalytic combustion of lean methane, such thermal storage functional catalysts with high thermal storage density show significant efficiency of lean methane conversion than pure Co3O4, and it can also keep the methane conversion at a high level for a long time even if the external heat source disappears. This indicates that the effective heat management of Co3O4/(SiAl@Al2O3) thermal storage catalysts during methane combustion process plays a crucial role in determining the catalytic activity via improving the thermal runaway and hot spots problems in catalyst bed and reducing heat loss. However, the content of SiAl@Al2O3 needs to be carefully regulated to avoid the decrease of activity resulting from the low active Co3O4 content. Particularly, the Co3O4/(SiAl@Al2O3-30 wt%) catalyst shows a competitive activity (e.g., T10, T50 and T90 at 226, 282 and 370 °C) and it surpasses the activity of pure Co3O4 in literatures although the active Co3O4 content is significantly lower than them. After turning off the heat source for 37 min, its methane conversion can still reach 50%, which is twice that of pure Co3O4. The present approach for thermal management in catalytic methane combustion reaction will provide good references for solving the problems (e.g., temperature runaway and hot-spot) in fixed bed reactors during other complex heterogeneous chemical reactions.

Study on Thermal Condu ctivity for Sulfur-Tolerant Methan ation Catalyst

Effective thermal conductivity of sulfur-resisting methanation catalyst

Study on two-dimensional model of reaction-mass transfer-heat transfer for sulfur-tolerant methanation catalyst

Effect of sulpher treatment on the performance of supported palladium catalysts for low temperature methane catalytic combustion

Macrokinetics of sulfur-tolerant methanation SDM-1 catalyst

The measurement of effective diffusivity for sulfur-tolerant methanation catalyst

Catalytic elemental sulfur-assisted methane activation at low temperature

Enhanced sintering resistance of bimetal/SBA-15 catalysts with promising activity under a low temperature for CO methanation

Analysis of tube array reactor for sulfur-tolerant methanation

Catalytic combustion of lean methane over MnCo2O4/SiC catalysts: Enhanced activity and sulfur resistance

Effective Thermal Conductivity of Fixed Packing Bed of Cobalt-based Catalyst

Analysis of external - Recycle reactor for sulfur - Tolerant methanation

Catalytic Combustion of Methane over Sncuo Catalysts

Encapsulated Co3O4/(SiAl@Al2O3) thermal storage functional catalysts for catalytic combustion of lean methane

Deactivation behaviors of MoS2/Si-ZrO2 catalyst during sulfur-resistant CO methanation

In situ observation of the promoting effect of H2S on the formation of efficient MoS2 catalyst for CH4/CO2 reforming

Cold modeling of a direct coupling autothermal methane reforming reactor

Syngas Production from Methane Steam Reforming and Dry Reforming Reactions over Sintering-Resistant Ni@SiO2 Catalyst

Thermal-chemical Reaction Characteristics of Ni/Al2O3 Catalytic Porous Material Filled Solar Reactor for Dry Reforming of Methane Process

Numerical study on methane heterogeneous reaction characteristics in micro catalytic combustors with orthogonal thermal anisotropic walls

Performance and Effective Kinetic Models of Methane Steam Reforming over an Ni-YSZ Anode of Planar Solid Oxide Fuel Cell