Abstract:Micromechanical resonant accelerometers based on electrostatic stiffness have the advantage of it being possible to adjust their sensitivity by changing the detection voltage. However, there is a high-order nonlinear relationship between the output frequency and the induced acceleration, so it is difficult to obtain the theoretical basis to guide the microstructure design. In this study, the dynamic equation for this type of accelerometer was established under the condition of the stiffness of the folded beams being much less than that of the resonant beams. The sensitivity was obtained first, and then silicon-based microstructures were fabricated, for which metal tube-shell vacuum packaging was adopted. The two static driving capacitances were about 0.88 pF, and the detection capacitances were about 0.38 pF in the experimental test. The sensitivity was 44.5 Hz/g when the detection voltage was 1V, while it was greater than 300 Hz/g when the detection voltage was 3V. With an increase in the detection and driving voltages, a coupling phenomenon occurred between the vibration amplitude and frequency of the resonant beam. The double-stage folded beam failed at a high detection voltage larger than 10 V. Through the experiment, a numerical simulation model for the accelerometer was established, providing the basis for a closed-loop control circuit design.

Structure of a Torsional Accelerometer

A New Type of MEMS Accelerometer with Up-Tuning Structure

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Design of Force-Balance Capacitive Accelerometer

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Modeling and Analysis of a SiC Microstructure-Based Capacitive Micro-Accelerometer

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

A Micromechanical Structure Eliminating Lateral Effect of Silicon Accelerometer

Design and Simulation of A Multi-Finger Micromechanical Silicon Accelerometer

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Design and Analysis of a Multi-Finger Micromechanical Silicon Accelerometer

Design the Structure of High-g Optical Microcavity Accelerometer

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

A Novel Micro-Machined Out-of-Plane Resonant Accelerometer with Differential Structure of Different-Height Resonant Beams

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

Critical Technologies in Design of Micromechanical Resonant Accelerometer

Micro-machined Resonant Out-of-plane Accelerometer with a Differential Structure Fabricated by Silicon-on-insulator–mems Technology

NEW HINGED MICROMACHINED HIGH-g ACCELEROMETER: MODELLING AND MECHANICAL ANALYSIS

Air damping of micromechanical silicon accelerometers

A micromachined resonant accelerometer