Abstract:Thermochemical heat transformers (THT) can offer the potential for efficient energy storage and upgrade based on a reversible solid-gas reaction. A mechanical booster pump (MBP)-assisted water-based sorption thermochemical heat transformer driven by low-grade solar thermal energy is proposed to handle variations in the heat demand of buildings. The MBP operates during the discharging process to adjust the magnitudes of temperature lift by compression ratio depending on the user's demands. The performances of the proposed cycle employing three different reactive salts are investigated and compared with the conventional THT cycle under various operating conditions. Results indicate that compared to the conventional THT cycle, the proposed cycle achieves a maximum temperature lift of 15–17°C, 17–19°C, and 23–26°C for SrBr 2 , LiOH, and CaCl 2 in the evaporating temperature range of 20–40°C, respectively. In the same operating conditions, SrBr 2 demonstrates the highest energy and exergy efficiencies, while CaCl 2 is inferior to the others due to its greater sensible heat consumption and lower reaction heat under the studied conditions. A suggestion is put forth for enhancing the temperature lift by employing a two-stage MBP-assisted cycle that utilizes the reactive salt SrBr 2 . Compared to the single-stage MBP-assisted cycle, the heat output temperature can be further increased by up to 3–16°C at the expense of a maximum decrease of 6.6%, 84.4%, and 9.0% in coefficient of performance (COP) based on total energy input, COP based on electricity input, and exergy efficiency, respectively, at 30°C evaporating temperature. The economic and environmental analysis indicates that the proposed system is economically and environmentally feasible and could be a promising alternative to residential water heaters.

Performance Analysis of the Two Stage Heat Transformer

A two-stage heat transformer with H2O/LiBr for the first stage and 2,2,2-trifluoroethanol(TFE)/N-methy1-2-pyrrolidone (NMP) for the second stage

A Hybrid Resorption-Compression Heat Transformer for Energy Storage and Upgrade with a Large Temperature Lift

Performance Analysis of an Absorption Heat Transformer with Different Working Fluid Combinations

Performance Analysis of a Separator Assisted Two-Phase Thermosyphon Based on an Experimentally Validated Model

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Thermodynamic Analysis on a Two-Stage Transcritical CO2 Heat Pump Cycle with Double Ejectors

Analysis of a Combined Trilateral Cycle - Organic Rankine Cycle (TLC-ORC) System for Waste Heat Recovery

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

Study on A New Ejection-Absorption Heat Transformer

Performance of a Two-Stage Solid-Gas Reaction Heat Transformer System

Investigations on the Cycle Performance of a Diffusion Absorption Heat Transformer Using HCOOK As an Alternative to LiBr

Experimental Investigations on the Temperature Lift Performance of a Novel Diffusion Absorption Heat Transformer

Experimental Investigation on an Absorption Heat Transformer for Production of Hot Water or Steam Generation

Performance Analysis on the Large Temperature Lift/Drop Multi-stage Vertical Absorption Temperature Transformer

Double-Lift Parallel Mode Absorption Heat Transformer With The Ternary Working Fluid Tfe-H2o-E181

Optimization Design of the Large Temperature Lift/drop Multi-Stage Vertical Absorption Temperature Transformer Based on Entransy Dissipation Method

Thermodynamic analysis of mechanical booster pump-assisted sorption thermochemical heat transformer driven by low-grade heat for building applications

Exergy Analysis of R1234ze(Z) As High Temperature Heat Pump Working Fluid with Multi-Stage Compression

Performance analysis of a two-stage evaporation heat pump drying system for graded cooling/dehumidification

Enlarged Temperature Lift of Hybrid Compression-Absorption Heat Transformer Via Deep Thermal Coupling