Abstract:To investigate the behavior of gas-particle two-phase flow in the impinging streams gasifier,a 3D numerical model was used to simulate the flow field characteristics inside the gasifer.The model was based on the Euler-Lagrange concept.The gas flow was treated as continuous phase with an Euler frame of reference,while the Lagrange method was used to trace the particles.The behavior of inter-particle collision and its effects on particle dispersion were presented.The predicted results agreed well with cold-model and hot-model experimental data.In order to investigate the influence factors on the flow field that might have a significant effect on the coal gasification process,some parametric studies were performed by changing the gas-solid flow inlet velocity,size of particle distribution,and gasifier geometry.The results showed that the residence time of particles increased with the straight section height above the burner,and the deposition flux increased with the inlet velocity.The model and experiment results showed that the highest turbulence intensity and flame of collision converged near the center of the impinging zone.The inter-particle collision led to particle agglomeration,but the holistic distribution of particle concentration was reasonable.Finally,the parameter of particle size was also investigated,and the particles with a smaller Stokes number had weaker influence on the flow field.

NUMERICAL SIMULATION OF THE GAS FLOW IN THE BBD COAL BALL MILL

Numerical Simulation Of Gas-Flow In Ball Mill

Cold Model Test on Gas-Solid Two Phase Flow in Double Charge-Discharge Coal Ball Mill

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Numerical Study of Gas–solid Flow in a Coal Beneficiation Fluidized Bed Using Kinetic Theory of Granular Flow

Dynamic Heat Transfer Characteristics of Gas-solid in Medium Speed Mill

Numerical Simulation and Optimization of Internal Flow Field in the High Pressure Coal Conveying Pump Based on the Dynamic Mesh

NUMERICAL SIMULATION ON TURBULENT FLOW AND HEAT TRANSFER OF VERTICAL PIPE IN QUENCH CHAMBER OF COAL GASIFIER

Numerical Investigation on Flow and Heat Transfer Performance of Non-Newtonian Bingham Fluid in Novel Spiral Wound Tube Heat Exchangers

Numerical Simulation of Gas-Particle Two-Phase Flow in Impinging Streams Gasifier

Numerical Modeling of a Bubbling Fluidized Bed Coal Gasifier by Kinetic Theory of Rough Spheres

Numerical Simulation on the Rich/Lean Pulverized Coal Burner

Numerical Simulation of the Flow and Combustion Processes in a Three-Dimensional, W-Shaped Boiler Furnace

Three-dimensional Numerical Simulation of Entrained-Flow Gasifier and Influence of Coal Distribution at the Inlet

Numerical Simulation on the Slag Flow and Heat Transfer Characteristics of the Cyclone Barrel for a Cyclone-Fired Boiler

NUMERICAL SIMULATION OF PRIMARY AIR MEASUREMENT AT THE INLET OF COAL MILL

Numerical simulation of coal gasification in OMB coal gasifier

Numerical Simulation for Pulverized Coal Gasifier's Fluid Flow Characteristic on Cold and Hot Condition

An Numerical Study on the Aerodynamic Field in Swirling Pulverized Coal Fired Boilers

Numerical modeling of three-dimensional flow field and two-dimensional coal combustion in a cylindrical combustor of co-flow jets with large velocity difference

CFD Numerical Simulation of the Internal Flow Field of the Vertical Pipe of the Texaco Coal Gasifier