Abstract:Amorphous Fe73.5-xCoxSi13.5B9Cu1Nb3（x=10,30,50） ribbons were prepared by the single copper wheel melt spinning technique in the air atmosphere.The nanocrystallization kinetics of amorphous ribbons was investigated by differential scanning calorimetry（DSC）.The apparent activation energies of amorphous ribbons were calculated by using Kissinger and Ozawa methods.It was found that the activation energies of the first crystallization reduce and those of the second crystallization rise with increasing Co content.The local Avrami parameter m for primary crystallization was calculated using Johnson-Mehl-Avrami（JMA） model.The values of the Avrami parameter showed that the primary crystallization mechanism of amorphous ribbons varied at different stages.In the initial stage,the crystallization mechanism was bulk crystallization with three dimensional nucleation and grain growth controlled by diffusion.In the following stage,it was surface crystallization with one dimensional nucleation and grain growth at a near zero nucleation rate.The variation of soft magnetic properties of nanocrystalline Fe63.5Co10Si13.5B9Cu1Nb3 powder cores as a function of milling time has been investigated.It was found that the effective permeability of the cores shows high frequency stability and decreases with increasing milling time.The quality factor increases with increasing frequency in the lower frequency range,reaches a maximum at the frequency of 80 kHz,and then decreases gradually with increasing frequency.

Intergrain Exchange Coupling And Coercivity Mechanism Of Nanocrystalline Sm2fe15-Xcuxsi2c (X=0 And 1) Ribbons Prepared By Melt Spinning

Hard magnetic properties and microstructures of melt-spun SmCo5Fex (x = 0, 1 and 2) ribbons

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Hard magnetic properties and microstructures of melt-spun SmCo<sub>5</sub>Fe<sub><i>x</i></sub>(<i>x</i>= 0, 1 and 2) ribbons

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

The intergrain exchange coupling in Sm(Co,Fe,Cu,Zr)<sub><i>z</i></sub> magnets with <i>z</i> = 7.0 and 7.5

Effect of Zn Substitution on Morphology and Magnetic Properties of Cufe2o4 Nanofibers

Effect of Cu substitution on structure and magnetic properties of anisotropic SmCo ribbons

Interaction and Magnetic Properties of NdCeFeB Melt-Spun Ribbons

Microstructure and magnetic properties of melt-spun Sm(Co0.58Fe0.31Cu0.04Zr0.05B0.02)z ribbons

Coercivity and Transmission Electron Microscopy Study of Nanocomposite Sm–Co Powders by Mechanical Alloying

Nanocrystalline Fe(Co)ZrMoBCu soft magnetic alloys: A transmission electron microscopy study of the microstructures

The Microstructure and Magnetization Behaviors of (pr8.2fe86.1−xcoxb5.7)0.99zr0.01 (x = 0–10) Nanocomposite Magnets

Beneficial Effect of the Substitution of Co for Fe on the Magnetic Properties of Melt-Spun Pr2Fe14C/α-Fe-type Nanocomposite Magnets

Mechanism of Ti-rich grain boundary phase formation and coercivity reinforcement in Sm(Fe0.8Co0.2)11TiB melt-spun ribbons

Microstructure and magnetic properties of Sm-Co-based amorphous nanocrystals controlled by B addition

Intergranular interaction in nanocrystalline Ce-Fe-B melt-spinning ribbons <i>via</i> first-order reversal curve analysis

THE ROLE OF GRAIN BOUNDARY IN THE Nd2Fe14B/α-Fe EXCHANGE COUPLING MAGNET

The Magnetic Properties of Melt-Spun Nd9Fe85−xMnxB6(x=0–1) Ribbons

Permanent magnetic properties of melt-spun Sm2(Fe, M)15Ga2C (M = Cu, Nb, Zr, Ti, V, Mo) ribbons