Abstract:A study on anti-ferroelectric (PbLa)(ZrTi)O 3 (PLZT) for electric vehicles (EV) applicable to DC-link was conducted. Multilayer ceramic capacitors (MLCCs) for DC-link require high-electric field properties and reliability. Oxygen vacancies are a major cause affecting insulation properties and reliability. There are acceptors and donors as methods for controlling the mobility and concentration of oxygen vacancies. The mobility and concentration of oxygen vacancies were simultaneously controlled, rather than individually controlled. Mn 4+ was selected as the acceptor and Dy 3+ was selected as the donor. After fixing Mn 4+ = 5.0 mol% to (Pb 0.82 La 0.12 )(Zr 0.86 Ti 0.14 )O 3 , insulation properties and reliability were evaluated according to Dy 3+ = 5.0, 10.0, 15.0 and 20.0 mol%. A high sintered density was obtained at a temperature of 1200°C in a reduction atmosphere. When Mn 4+ = 5.0 mol% and Dy 3+ = 10.0 mol% were co-substituted into PLZT, a dielectric constant of about 1800 and a breakdown voltage of about 12 kV mm −1 were obtained. In the co-substituted PLZT, capacitance change and insulation degradation properties were greatly improved. Oxygen vacancy mobility and concentration control were effective in reliability properties. Thermally stimulated depolarization current (TSDC) was analysed to confirm the polarization of oxygen vacancies. TSDC increased with electric field and time. TSDC decreased in co-substituted PLZT compared to un-substituted PLZT. A factor affecting TSDC is the behaviour of oxygen vacancies. Based on the result, the oxygen vacancies are polarized and moved by the application of an electric field, resulting in degradation of insulating properties.

A New Mechanism for the Influence of Electroplating and Electroless Plating on Ferroelectric Components

Influence of electroless nickel plating on multilayer ceramic capacitors and the implications for reliability in multilayer ceramic capacitors

Effects of Electrochemical Hydrogen Charging on Lead-Based Relaxor Ferroelectric Multilayer Ceramic Capacitors

Influence of permeation of electroless nickel plating solution on porous PTC ceramics

Effect of Sintering Conditions on the Reliability of PMN-Based MLCC Against Electroplating

Strain engineering of ferroelectric negative capacitance in PbZr<sub>(1-<i>x</i>)</sub>Ti<sub><i>x</i></sub>O<sub>3</sub> thin films

Two different effects of electroless nickel plating on R-T characteristic of BaTiO3-based PTC ceramics

An Xps Study on the Degradation of Lead Magnesium Niobate-Based Relaxor Ferroelectrics During Nickel Electroplating

Comparative Experiment on Influence of Ferrum and Cuprum Electrodes on Electroosmotic Effects

Mechanism of resistance degradation of lead magnesium Niobate-based ferroelectrics induced by hydrogen reduction during electroplating

Effect of oxygen vacancies on dielectric property and reliability of anti-ferroelectric PLZT applicable to EV-MLCC

Hydrogen-induced Degradation of PMN-based Relaxor Ferroelectrics During Nickel Electroplating

Investigation of electroplating-induced degradation of PMZNT relaxor ferroelectrics

Insight into the mechanism of hydrogen permeation inhibition by cerium during electroplating: Enhanced kinetics of hydrogen desorption

Effects of Electroless Nickel Plating on Resistivity-temperature Characteristics of (Ba1-Xpbx)tio3thermistor

Mechanism of Polarization Fatigue in BiFeO3: the Role of Schottky Barrier

Ultrahigh Electrostrictive Effect in Lead-Free Ferroelectric Ceramics Via Texture Engineering

Effect of Interactions at the Cofired Interface of Electrode/Ceramics on the Reliability of Lead-Based Multilayer Ceramic Capacitors

Effect of nickel electroplating on the electrical properties of PMZNT relaxor ferroelectrics

Electro-plating technology of high performance low sintering MLC

Space-charge Effect on Electroresistance in Metal-Ferroelectric-Metal capacitors