Abstract:Silica is one of the most widely used ceramics due to its excellent chemical stability and dielectric property. However, its destructive brittle nature inhabits it from wider application as a functional ceramic. An improvement in toughness is a challenging topic for silica ceramic, as well as other ceramics. In the paper, silica ceramic with different types of boron nitride powders and alumina platelets was fabricated by hot-pressing. Introduction of the additives had great influence on the composites' mechanical properties and microstructure. The silica matrix composite containing micro-sized boron nitride powders possessed the best mechanical properties, including the bending strength (134.5 MPa) and the fracture toughness (1.85 Mpa·m1/2). Meanwhile, the introduction of alumina platelets combined with boron nitride nanosheets achieved an effective enhancement of fracture toughness while maintaining the bending strength. Compared with the monolithic silica, the composite with simultaneous addition of alumina platelets and boron nitride nanosheets had a fracture toughness of 2.23 Mpa·m1/2, increased by approximately 27% (1.75 Mpa·m1/2). The crack deflection and platelet pullout were contributing to enhancement of the fracture toughness. The improved mechanical properties, combined with the intrinsic excellent dielectric and chemical properties, make the silica matrix composites promising wave transparent and thermal protection materials.

Mechanical Properties and Toughening Mechanisms of Si 3 N 4 Matrix Laminated Ceramic Composite

Mechanical properties and microstructure of laminated Si3N4+SiCw/BN+Al2O3 ceramics densified by spark plasma sintering

Toughness and R-curve behaviour of laminated Si3N4/SiCw ceramics

Mechanical properties and microstructure of a Si3N4/Ti3SiC2 multilayer composite

Effects of additives to Si3N4 matrix on microstructure and properties of laminated Si3N4/BN ceramics

Mullite-bonded SiC-whisker-reinforced SiC Matrix Composites: Preparation, Characterization, and Toughening Mechanisms

Preparation and mechanical properties of SiC whisker-reinforced alumina

Mechanical Properties of Silicon Carbide Whisker-Reinforced Silicon Nitride Matrix Composites

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Study of key technologies on whisker-reinforced ceramic matrix composites (Part III): design of in-situ fibrous monolithic structure and laminated structure

The Research of SiC<sub> </sub>and Si<sub>3</sub>N<sub>4 </sub>whiskers Reinforced Si<sub>3</sub>N<sub>4</sub> Composites to Improve Its Wear and Mechanical Properties

Mechanical Properties and Microstructure of Hot-Pressed Silica Matrix Composites

Si3N4-SiC ceramic nanocomposites

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite

THE MICROSTRUCTURE AND THE PROPERTY OF SiC/Si LAMINATED CERAMIC COMPOSITES FROM PAPER

Influence of Sintering Process on the Fracture Behavior of C-F/SiC Laminated Ceramic Composites

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics

Preparation and mechanical behavior of Si 3 N 4 composite ceramics with brick‐and‐mortar structure

Preparation And Mechanical Properties Of Zirconium Diboride Matrix Composites Reinforced By Silicon Carbon Platelets

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

High toughness Si3N4 ceramic composites synergistically toughened by multilayer graphene/β-Si3N4 whisker: Preparation and toughening mechanism investigation