Abstract:High‐quality hexagonal boron nitride thin films are grown on Ge(001)/Si substrates from borazine. The formation of randomly oriented nano‐crystallites is suppressed by changing the reactor configuration. Local changes in borazine temperature and partial pressure distribution are found to be responsible for this effect via computational fluid dynamics simulations, as they impact gas phase reactions and film thickness homogeneity. The chemical vapor deposition (CVD) growth of hexagonal boron nitride (hBN) on Ge substrates is a promising pathway to high‐quality hBN thin films without metal contaminations for microelectronic applications, but the effect of CVD process parameters on the hBN properties is not well understood yet. The influence of local changes in pressure and temperature due to different reactor configurations on the structure and quality of hBN films grown on Ge(001)/Si is studied. Injection of the borazine precursor close to the sample surface results in an inhomogeneous film thickness, attributed to an inhomogeneous pressure distribution at the surface, as shown by computational fluid dynamics simulations. The additional formation of nanocrystalline islands is attributed to unfavorable gas phase reactions due to the radiative heating of the injector. Both issues are mitigated by increasing the injector‐sample distance, leading to an 86% reduction in pressure variability on the sample surface and a 200 °C reduction in precursor temperature. The resulting hBN films exhibit no nanocrystalline islands, improved thickness homogeneity, and high crystalline quality (Raman FWHM = 23 cm−1). This is competitive with hBN films grown on other non‐metal substrates but achieved at lower temperature and with a low thickness of only a few nanometers.

Effects of carrier gas on formation and tribological behavior of BN films deposited by PCVD

BN Films Deposited by HFPECVD and the Mechanism of the Process

Mechanical Properties and Bonding Structure of Boron Carbon Nitride Films Synthesized by Dual Ion Beam Sputtering

The Transition Metal Surface Passivated Edges of Hexagonal Boron Nitride (H-Bn) and the Mechanism of H-Bn's Chemical Vapor Deposition (CVD) Growth

Influence of Length-Scale on Stabilization of Boron Carbide in Al-based Metal Matrix Composites During Plasma Activated Sintering

Dielectric Barrier Discharge Assisted Chemical Vapor Deposition of Boron Nitride Phosphide Films on A Quartz Substrate

Effect of Flow Rate and Precursor Sublimation Temperature on the LPCVD Growth of Hexagonal Boron Nitride

Deposition and characterisation of nanocrystalline Mo2N/BN composite coatings by ECR plasma assisted CVD

Phase evolution in boron nitride thin films prepared by a dc-gasdischarge assisted pulsed laser deposition

Influence of CrB2 target current on the microstructure, mechanical and tribological properties of Cr–B–C–N coatings in water

Microstructure and Tribological Behavior of BCN Thin Films with Different Nitrogen Contents

Investigating Impacts of Local Pressure and Temperature on CVD Growth of Hexagonal Boron Nitride on Ge(001)/Si

Impact of hBN Content on the Tribological Behavior and Thermal Diffusivity of HVOF-Sprayed Cr3C2-NiCr Coatings

Investigation of BCN Films Deposited at Various$hboxN_2/hboxAr$Flow Ratios by DC Reactive Magnetron Sputtering

Plasma CVD of hydrogenated boron-carbon thin films from triethylboron

Field-Ionization Source Induced Phase Transition from Hbn to Cbn During Pulsed Laser Deposition

Structural And Tribological Characteristics Of Carbon Nitride Films Deposited By The Reactive Ionized-Cluster Beam Technique

Influence of boron content on the microstructure and tribological properties of Cr-B-N coatings in water lubrication

Studying the growth of cubic boron nitride on amorphous tetrahedral carbon interlayers

Tribological behaviour of Ag–BN coatings prepared by plasma spraying

Composition and Structure of BCN Films Prepared by Ion Beam-Assisted Pulsed Laser Deposition