Abstract:Silicon carbon nitride (SiCN) films were deposited by dual ion beam sputtering (DIBS) of SiC target in mixed Ar/N2 atmosphere at 100°C. The surface roughness and the mechanical properties of the SiCN films were measured by using non-contact surface profilometer and nano-indenter. The bonding structure for the SiCN films was analyzed using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS), respectively. The influences of assisting ion beam energy and concentration on surface roughness, mechanical properties and bonding structure of the SiCN films were discussed systematically. The results showed that the variations of surface roughness and hardness for the SiCN films with the assisting ion beam energy were in the range of 7–27nm and 23–29GPa, respectively. With an increase in the nitrogen ion beam concentration, the film surface roughness first decreased to a minimum value, and then increased, while the hardness first increased to a peak value, and then decreased. When the assisting ion beam energy and concentration were 300eV and 0.5, the SiCN film possessed the low surface roughness of 11nm and the highest hardness of 29GPa, its atoms ratio, C:Si:N:O was about 1:0.42:0.18:0.32. The bonding structure of the SiCN films mainly consisted of Si–C, Si–N, C–N, CN and CC bonds and corresponded to a network of the mixed sp2/sp3 hybridized bonds with the units of Si(C4), Si(N4) and Si(C4−nNn). The film mechanical properties were correlated to the proportion of Si–C, Si–N, CN and C–N bonds in the SiCN films.

Mechanical Properties and Bonding Structure of Boron Carbon Nitride Films Synthesized by Dual Ion Beam Sputtering

Composition and Structure of BCN Films Prepared by Ion Beam-Assisted Pulsed Laser Deposition

Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process

Surface Roughness, Mechanical Properties and Bonding Structure of Silicon Carbon Nitride Films Grown by Dual Ion Beam Sputtering

Synthesis of BCN thin films by nitrogen ion beam assisted pulsed laser deposition from a B4C target

Grain Boundaries in Chemical-Vapor-deposited Atomically Thin Hexagonal Boron Nitride

Superhard solid solutions of diamond and cubic boron nitride

Optical and electronic properties of BCN films deposited by magnetron sputtering

BN Films Deposited by HFPECVD and the Mechanism of the Process

Turbostratic Boron Carbonitride Films Produced by Bias-Assisted Hot Filament Chemical Vapor Deposition

Transition from amorphous boron carbide to hexagonal boron carbon nitride thin films induced by nitrogen ion assistance

Optical & Electronic Properties of Carbon Nitride Thin Films

Direct Synthesis of Sp3‐hybridized BCN Compound by High Pressure and Temperature

Synthesis and Analysis of SiBCN Films Obtained by Plasma-Enhanced Chemical Vapor Deposition from Triethylaminoborane, Hexamethyldisilazane, and Ammonia

Chemical Structure and Micro-Mechanical Properties of Ultra-Thin Films of Boron Carbide Prepared by Pulsed-Laser Deposition

Dielectric Barrier Discharge Assisted Chemical Vapor Deposition of Boron Nitride Phosphide Films on A Quartz Substrate

PREPARATION OF B-N FILMS BY ION BEAM ASSISTED DEPOSITION

Investigation of Carbon Nitride Films Deposited by Ion Beam-Assisted Deposition with Low Bombarding Energy of N Ions

Preparation of cubic boron nitride films by radio frequency magnetron sputtering and radio frequency ion plating

Growth-Parameter Spaces and Optical Properties of Cubic Boron Nitride Films on Si(001)

Studying the growth of cubic boron nitride on amorphous tetrahedral carbon interlayers