Abstract:Developing a miniatured laser vibrometer becomes important for many engineering areas, such as experimental and operational modal analyses, model validation, and structural health monitoring. Due to its compact size and light weight, a miniatured laser vibrometer can be attached to various mobilized platforms, such as an unmanned aerial vehicle and a robotic arm whose payloads can usually not be large, to achieve a flexible vibration measurement capability. However, integrating optics into a miniaturized laser vibrometer presents several challenges. These include signal interference from ghost reflectance signals generated by the sub-components of integrated photonics, polarization effects caused by waveguide structures, wavelength drifting due to the semiconductor laser, and the poorer noise characteristics of an integrated laser chip compared to a non-integrated circuit. This work proposes a novel chip-based high-precision laser vibrometer by incorporating two or more sets of quadrature demodulation networks into its design. An additional set of quadrature demodulation networks with a distinct reference arm delay line length can be used to conduct real-time compensation to mitigate linear interference caused by temperature and environmental variations. A series of vibration measurements with frequencies ranging from 0.1 Hz to 1 MHz were conducted using the proposed laser vibrometer to show its repeatability and accuracy in vibration and ultrasonic vibration measurements, and its robustness to test surface conditions. The proposed laser vibrometer has the advantage of directly measuring the displacement response of a vibrating structure rather than integrating its velocity response to yield the measured displacement with a conventional laser Doppler vibrometer.

Low Frequency Vibration Measurement With Backscatter-Modulated Laser Diode

A Study of Equal Optical Path in Low-Frequency Laser Vibration Measuring System

Low-frequency vibration measurement by a dual-frequency DBR fiber laser

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Study on Displacement Measurement with Optical Feedback of Dual Frequency Laser

Experimental Study Of Vibration Measurement Based On Laser Frequency Splitting Principle

Fiber-Optic Vibration Sensor Based on Beat Frequency and Frequency-Modulation Demodulation Techniques

Noncontact Intelligent Vibrometer Based on Laser Triangulation

Frequency-Shifted Optical Feedback Measurement Technologies Using a Solid-State Microchip Laser

All-fiber laser feedback interferometer using a DBR fiber laser for effective sub-picometer displacement measurement

Micro-vibration measuring technology based on heterodyne interference

Experimental and theoretical study of displacement measurement based on frequency modulation optical feedback in a birefringence dual frequency laser

Development and Validation of a New Type of Displacement-Based Miniatured Laser Vibrometers

Low-Frequency Vibration Sensor with Dual-Fiber Fabry–Perot Interferometer Using a Low-Coherence LED

Displacement Sensor Based on Intra-Cavity Tuning of Dual-Frequency Gas Laser

High Resolution Displacement Measurement by a Novel Michelson Laser

A Laser Walk-off Sensor for High-Precision Low-Frequency Rotation Measurements.

A Novel High Resolution Vibration Sensor Based on Laser Frequency Splitting Technology

LDV-induced Stroboscopic Digital Image Correlation for High Spatial Resolution Vibration Measurement

High-speed Non-contact Displacement Sensor Based on Microchip Nd:YVO4 Laser Feedback Interferometry

Applications of Laser Vibrometer in Vibration Measurement of Microstructures