Abstract:Automobile steering knuckle is an important part of the steering system, which is subjected to significant impacts and loads during its operation. Generally, cast aluminum steering knuckles are usually produced using some type of enhanced low-pressure casting process, like counter-pressure casting. Compared with aluminum forging and sand cast ductile iron, it can improve the production speed and achieve the adequate casting quality. In this study, various methodologies such as dynamic thermomechanical analysis, differential scanning calorimetry, and the laser flash method were employed to study the thermophysical properties of AlSi7Mg0.3. Further, the physical model of a counter-pressure casting system with an aluminum interior was established based on the combination of the tested and the theoretical properties of aluminum; this was achieved with the consideration of the presence of other factors including rapid solidification. The temperature field of the system was computed and verified by thermocouples at six different points during the tooling and the shrinkage simulation. It was observed that the plot shape of the computed temperatures and that of the simulated ones correlated; further, the difference between the peaks and the valleys was controlled to be 3% on an average, with the maximum variation of 7% at only one point. Moreover, all the predicted shrinkages were verified by the casting. This study provides a solid foundation for facilitating the simulation of the morphologies of the microstructure.

ANALYSIS OF TECHNOLOGICAL PRESSURE HEAD OF CCSC

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Process Optimization of Low-pressure Die Casting of Aluminum Alloy Wheel based on Taguchi Method

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Constitutive Model of Aviation Aluminum-Alloy Material in Metal Machining

Prediction method of shrinkage cavity and shrinkage porosity in solidification process under low-pressure casting

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

Hydraulic Modeling on Flow Behavior in High-Speed Billet Continuous Casting Mold Considering Hydrostatic Pressure and Solidified Shell

Low pressure casting technology and forming process analysis of metal mold based on ProCAST FEA procedure

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

Mechanical Analysis and Optimal Control of Hydrogen Storage Vessels with Carbon Fiber Filament Wound Aluminum Liner

Accurate Simulation of Complex Temperature Field in Counter-Pressure Casting Process Using A356 Aluminum Alloy

Simulation Analysis on Micro Hole Forming of Aluminum Alloy in Extrusion Casting Process

Microstructure simulation in pressurized solidification during squeeze casting of aluminum alloy A356

A Mathematical Model for Simulating the Microporosity of Squeeze Casting of Aluminum Alloy

Key Analysis of Design and Numerical Simulation for Aluminum Alloy Impeller Low-pressure Casting Mold

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings