Abstract:Multi-loop theory is the most common and effective method used for analyzing stator winding internal faults of synchronous generators. Based on the current analysis methods, this paper modifies the existing models and introduces the motion equation of rotor into the Multi-loop analysis model to describe the associated relations between main parameters (e.g. current, voltage, torque, speed of rotation) of generator. Since the starting process of motor contains abundant information, this paper analyzes the influence of internal faults to relevant parameters, during the starting process from zero to rated speed. Through analysis some conclusions can be obtained as follow: when stator winding internal faults occur, since the influence of space harmonic is stronger, electromagnetic torque is on oscillatory regime. All waves are distorted when turn-to-turn faults occur. The starting current is bigger than normal, and the current will fluctuate after stabilization. The changing trends of short circular current and neutral-point current are the same. The currents are both small when starting, then gradually decay and go stabilization after an obvious increasing. The amplitudes of currents are far bigger than every branch current of stator. After faults, the electromagnetic torque of motor changes a lot and there is still an oscillation with certain amplitudes after stabilization. More short turns would cause bigger amplitudes of oscillation.

CHARACTERISTICS OF NOISE FROM EXCITER OF SYNCHRONOUS MACHINES ON-LINE PD MONITORING FOR STATOR WINDINGS

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Noise suppressing techniques used for on-line monitoring of partial discharge in large generators

METHODS OF NOISE SUPPRESSION FOR ON-LINE MONITORING PARTIAL DISCHARGE IN TRANSFORMERS

Noise Rejection Techniques Used for On-Line Monitoring of Partial Discharges in Large Turbine Generators

Transmission Character of Pulse-Shaped Noise in Insulation Monitoring for Turbo-Generators

Study on the Noise of the Longitudinal-torsional Ultrasonic Motor

APPROACHES OF ON-LINE MONITORING FOR HV ELECTRICAL MACHNES PARTIAL DISCHARGE

Study of Noise-reject Technique for PD Online Monitoring on Cable Joint

An Application Study of a New De-Excitation Method for Generator with Self-Shunt Excitation

Field Monitoring and Analysis on Vibration and Noise Characteristics of AC Transformer Caused by ± 660kv Yin‐dong DC System

Online Monitoring of Inter-turn Short Circuit Fault of Field Winding in Large Turbo-generator

A De-excitation Study of Synchronous Generator at Fault

Steady-State Calculation And Online Monitoring Of Interturn Short Circuit Of Field Windings In Synchronous Machines

Online monitoring of excitation winding inter-turn short circuit of generator/motor

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Online Identification Methodology of Field Winding Short Circuit Fault of Turbogenerator

Effect of Exciter and Power System Stabilizer on Subsynchronous Resonance Damping

The Online Stator Winding Insulation Monitoring for PMSG-PWM Rectifier System under Various Working Conditions.

Analysis and Rejection of Noises from Partial Discharge (PD) On-Site Testing Environment

Analysis of Excitation Winding Induced EMF in Non-Overlapped Stator Wound Field Synchronous Machines