Abstract:Nowadays, the microelectronics industry broadly uses the flipchip technology to enhance the packaging density. However, the small size and the unique geometry of the flip-chip solder joints induce the electromigration (EM) reliability issue. In this study, a Pb-free solder joints (SAC1205) was EM tested by a current of 7.5×10 3 A/cm 2 . During the tests, a three-dimensional (3D) X-ray laminography method was applied to in-situ observe the microstructure evolution. The laminography method allows for the non-destructive observation and provides the quantitative analysis among three dimensions. After EM testing for 650 hr, a new EM failure mechanism was found rather than the well-known models, the pancake void propagation and the under-bump-metallization dissolution. According to the laminography images at different testing stages, many voids simultaneously formed and grew during the entire procedure of testing. Most of them distributed in the current crowding region, but a few also located in the low-current-density region. As the testing time increased, voids grew bigger, coalesced with each other, and finally became large voids which occupied the interface and caused EM failure. The finite-element (FE) method was also applied to analyze the interplay between the microstructure evolution and current density redistribution. A series of 3D FE models were built based on the laminography images at different testing stages. The current density distribution from the FE analysis indicates that the multiple voids formation does not affect the global current density distribution until the voids merged together and became very large voids in the late stage of EM testing. The relieving of the global current crowding in the pancake void model was not found in this new EM failure mechanism. It was the local current crowding found in the new model that responsible for the EM retardation.

Predicting Three-Dimensional Solder Joint Shapes of SMT Based on Minimal Energy Principle

Predicting fatigue life of Solder joint with submodel method for a BGA package

Shape Prediction of BGA Solder Joint and Its Reliability Optimization Design

A new prediction methodology for electromigration-induced solder degradation in a WL-CSP system

Interface of Solder Joint Shape Prediction of RC Chip and Reliability Analysis in SMT

An Integrated System for Prediction and Analysis of Solder Interconnection Shapes

Shape Prediction and Reliability Design of Ball Grid Array Solder Joints

Finite Element Modeling Optimized by Solder Joint Morphology Simulation for Electrical-Magnetic-Thermal-Force Multi-Physical Field Coupling of PCB Assemblies

Overview on Solder Joint Shape Prediction Technology in Electronic Packaging

Modeling of Three-Dimensional Geometry of Solder Joint in Fiber Attachment Soldering

Automatic computer_aided system for simulating solder joint formation

New Reliability Assessment Method for Solder Joints in BGA Package by Considering the Interaction between Design Factors

Improved modeling for solder joint geometry and self-alignment in flip chip bonding

Low cycle fatigue performance of ball grid array structure Cu/Sn–3.0Ag–0.5Cu/Cu solder joints

Prediction of the Fillet Mass and Topology of Aluminum Brazed Joints

Prediction of Solder Joint Geometry for Optical Fiber Attachment Assembly in Direct-Coupling Applications

Effect of warpage on solder joint fatigue life by influencing the solder joint shape in BGA packages

Simulation Analysis of Tin Absorption Morphology of CCGA Solder Columns Based on Energy Minimization

Study of Electromigration-Induced Formation of Discrete Voids in Flip-Chip Solder Joints by In-Situ 3D Laminography Observation and Finite-Element Modeling

Reliability Study on Thermal Cycling of QFP Device Solder Joints Based on Morphological Optimisation

Finite element method and experimental study on life prediction of lead-free BGA solder joints using an energy-based approach