Abstract:The development of high density and high integration of electronic chips puts forward stricter requirements on electronic packaging structures. Under the premise of lead-free rules, Sn-3.0Ag-0.5Cu (SAC305) has developed into a competitive solder material. However, the reliability of its mechanical properties has been attracting much attentions especially under extreme conditions. In this paper, the high-strain rate experiments are performed by a split-Hopkinson pressure bar (SHPB) to realize different plastic strain rate, while the high temperature environment is achieved by incorporating a heating furnace. By combining these two devices, the dynamic responses of solder specimens can be measured in the strain rate range from 833 s −1 to 1961 s −1 and the temperature conditions of 70°C and 120°C. It is worth noting that as a typical strain-rate hardening process, the maximum stress undergoes an initial ascending stage as the applied strain rate increases. Nevertheless, the hardening process is followed by a descending stage to indicate a softening process of maximum stress due to a further temperature increase during the rapid material deformation at higher strain rates. To gain a further insight into this maximum stress transition, the microstructure characterizations of the impacted solder specimens are carried out by a scanning electron microscope (SEM). It is found that the β-Sn phases and eutectic phases appear to experience refinement and then coarsen as the plastic strain rate continues to increase. A finite element (FE) model is created in the commercial nonlinear FE software ABAQUS/Explicit by considering all the experimental details. Since none of the existing material models in the material library is available for such a maximum stress transition with different ranges of strain rate, the mechanical properties of solder material are emphasized by proposing an improved Johnson-Cook model which can be readily utilized in the numerical evaluations of packaging structures under extremely high strain-rate conditions.

Advanced Statistical Model Calibration to Determine Manufacturing-Induced Variations of Effective Elastic Properties of SAC Solder Joints in Leadless Chip Resistor Assemblies

Mechanical Properties and Parameter Determination of Anand Viscoplastic Constitutive Model for Pb-free Solder Alloys

Anand Parameter Test for Pb-Free Material SnAgCu and Life Prediction for a CSP

Experimental Determination and Modification of Anand Model Constants for Pb-Free Material 95.5Sn4.0ag0.5cu

Characterization of Dynamic Behavior of Pb-free Material 95.7sn3.8ag0.5cu and Its Determination of Dynamic Constitutive Model Parameters

Predicting fatigue life of Solder joint with submodel method for a BGA package

Experimental and Statistical Study of the Fracture Mechanism of Sn96.5Ag3Cu0.5 Solder Joints via Ball Shear Test

Calibration of a Constitutive Model from Tension and Nanoindentation for Lead-Free Solder

Evaluation of Design Parameters for Leadless Chip Resistors Solder Joints

Thermal Cycling Life Prediction of Sn-3.0Ag-0.5Cu Solder Joint Using Type-I Censored Data

Effect of Differently Shaped Solder Joints of Chip Resistor On Fatigue Life

An insight into dynamic properties of SAC305 lead-free solder under high strain rates and high temperatures

Effective Acquisition of Elastoplastic and Creep Parameters of Lead-Free Solder Alloy from High-Temperature Micro-Indentation Eliminating the Size Effect

Constitutive behavior and Anand model of novel lead-free solder Sn-Zn-Bi-In-P

Reliability Analysis of Lead-Free Solders in Electronic Packaging Using a Novel Surrogate Model and Kriging Concept

A dual-phase crystal plasticity finite-element method for modeling the uniaxial deformation behaviors of thermally aged SAC305 solder

A Mechanistic Model for Solder Joint Failure Prediction Under Thermal Cycling

Finite element method and experimental study on life prediction of lead-free BGA solder joints using an energy-based approach

A developed crystal plasticity model for viscoplastic mechanical behavior of SAC305 solder under thermomechanical coupled cyclic loading

Reliability modeling and assessment of solder joints of electronic assemblies under mixed exposure to mechanical loads

Experimental and Finite Element Method Studies of J-Lead Solder Joint Reliability