Abstract:The initial stage of Ni-TiO2 composite system electrodeposition on glassy carbon electrode from an acidic solution of nickel sulfate was investigated using cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). Analysis of current density-time transients was performed using the nonlinear fitting procedure and electrochemical impedance spectroscopy was simulated by Z-view software. Besides, the surface morphology of Ni-TiO2 co-deposition at the initial stage was observed by scanning electron microscopy (SEM). The results show that, in the case of low overpotential (−790 mV vs SCE), the presence of TiO2 particles in the plating bath makes the nucleation relaxation time t max decreased clearly. Meanwhile, the electro-crystallization of Ni-TiO2 system follows a Scharifker-Hills (SH) progressive nucleation/growth mechanism. While in the case of higher overpotential, the presence of the TiO2 particles in solution makes the nucleation relaxation time tmax increased. At −850 mV (vs SCE), the co-deposition of Ni-TiO2 system meets SH instantaneous nucleation/growth mechanism. The results of impedance spectra show that the appearance of the characteristic inductive loops represents the nucleation/growth of nickel and the presence of TiO2 particles reduces the charge transfer resistance of solution. The SEM observation confirms that TiO2 particles can be considered as favorable sites for nickel nucleating.

Tem Investigation of Initiation of Electroless Nickel Deposition on Pure Iron

TEM study of the mechanism of Ni ion release from Nitinol wires with original oxides

XTEM STUDY ON ION-PLATWG ALUMINUM BRONZE FILM

Initiatory Investigation on High-density Nano Precipitation of(非汉字符号) in Fe-N Austenite

Codeposition Behavior of Fe-Ni Alloys: A Review in Mechanisms, Preparation and Effects on Composition

Initial Deposition Mechanism of Electroless Nickel Plating on Magnesium Alloys

A Study on the Electrodeposition Behaviors of Nickel-iron-tungsten Alloy

Kinetics Analysis of Ni-TiO 2 Composite System During Initial Stages of Electro-Crystallization

The Initial Process of Amophous Electroless Nickel

On the Mechanism of Electroless Ni‐P Plating

Electrocrystallization Nucleation and Growth of NiFe Alloys on Brass Substrate

Electrochemical Nucleation and Growth of Sn Onto Double Reduction Steel Substrate from a Stannous Fluoborate Acid Bath

An In-Situ TEM Investigation on Microstructure Evolution of Ni-25 At.% Al Thin Films

Electrochemical co-deposition of carbon nanotube/Ni composite layer

The Effects of P and Metal Elements in Electroless Nickel-Based Alloys on the Formation of Ti/Zr Conversion Coating

An Investigation into Electrodeposited Co−Ni−TiO2 Films with Improved Mechanical and Corrosion Properties

Thermodynamic Calculation of Nickel Complex in Electroless Nickel Solutions during Plating

Morphological and Corrosion Characterization of Electroless Ni-P Coatings Deposited on Ductile Iron

Role of various pretreatment processes in electroless nickel deposition on TiH2 particles with a simple plating bath

Quasi-in-situ Observing the Growth of Native Oxide Film on the FeCr15Ni15 Austenitic Alloy by TEM

Electrochemical study of Ni deposition on carbon microfiber