Abstract:Switched capacitor (SC) techniques are well proven to be excellent candidates for implementing critical analogue functions with high accuracy, surpassing other analogue techniques when embedded in mixed-signal CMOS VLSI. Conventional SC circuits are primarily limited in accuracy by a) capacitor matching and b) the accuracy with which a differential amplifier can squeeze charge from one capacitor to another between clock periods. In Switched-Capacitor Techniques for High-Accuracy Filter and ADC Design, alternative SC techniques are proposed which allow the achievement of higher intrinsic analogue functional accuracy than previously possible in such application areas as analogue filter and ADC design. The design philosophy is to create the required functionality without relying on digital calibration or correction means but instead to develop methods which have reduced dependence on both component matching (especially capacitor matching) and parasitic effects (especially parasitic capacitance). However, the proposed techniques are just as amenable to further digital accuracy enhancement via calibration and/or correction as traditional methods. Two popular application areas are explored in the course of this book for exploitation of the proposed techniques, viz. SC filters and algorithmic ADCs - both cyclic and pipelined. Furthermore, efficient system level design procedures are explored in each of these two areas. The validity of the concepts developed and analyzed in Switched-Capacitor Techniques for High-Accuracy Filter and ADC Design has been demonstrated in practice with the design of CMOS SC bandpass filters and algorithmic ADC stages. For example, a 10.7MHz radio IF selectivity filter integrated in standard CMOS, employing the proposed methods, achieves an accuracy greater than ceramic filters. Another example is an ADC with better than 12-bit intrinsic accuracy, albeit capacitors with only 9-bits matching accuracy were used in the realization. The ADC architecture is also very robust and proven in an embedded digital VLSI application in the very newest 65nm CMOS. The power consumptions and silicon areas of the solutions proposed here are lower than other known solutions from the literature.

A New Kind of Switched Capacitor Array

A New Current Switch Driver with Improved Dynamic Performance Used for 500ms/s, 12-Bit Nyquist Current-Steering DAC.

A 12-Bit 1gs/s Current-Steering DAC with Matching Capacitor in Switched Current Cell

A Parasitic Elimination Bootstrapped Switch and a Fast Settling Residual Amplifier for High-Speed and High-Resolution Pipelined ADC

Non-Ideal Effects of Mos Capacitor in A Switched Capacitor Waveform Recorder Asic

A Low-Supply-voltage High-Power-handling Stacked SPDT Switch Based on Feedforward Capacitors.

Large Bandwidth RGC Transimpedance Preamplifier Design in SCA

Early-Stage Planning of Switched-Capacitor Converters in a Heterogeneous Chip

Novel Calibration Method for Switched Capacitor Arrays Enables Time Measurements With Sub-Picosecond Resolution

Using Nmos Transistors As Switches For Accuracy And Area-Efficiency In Large-Scale Addressable Test Array

Switched-Capacitor Techniques For High-Accuracy Filter And ADC Design

A 12b 200KS/s SAR ADC with novel capacitor switching procedure and digital background calibration

Radiation Characterization of A Switched Capacitor Array Readout Asic for Time Projection Chamber

A Switched-Capacitor Single-ended to Differential Stage for A/D Conversion of IRFPA ROIC

A Power-Efficient Reference Buffer with Wide Swing for Switched-Capacitor ADC

An Investigation on Capacitance-Trigger ESD Protection Devices for High Voltage Integrated Circuits

A Design Method of Capacitor Arrays for High-Resolution SAR ADCs

Charge-Compensation-Based Reference Technique For Switched-Capacitor Adcs

Development of P-C Switch with Adjustable Gap

A Low-Energy and Area-Efficient Vaq-Based Switching Scheme with Capacitor-Splitting Structure for SAR ADCs

Casca: A Readout Asic For A Tpc Based X-Ray Polarimeter