Abstract:The demand for advanced Al-based alloys with tailored structural and magnetic properties has intensified for applications requiring a high thermal stability and performance under challenging conditions. This study investigated the phase evolution, magnetic properties, thermal stability, and microstructural changes in the Al-based alloys Al82Fe16Nb2 and Al82Fe14Nb2Mn2, synthesized via mechanical alloying (MA), using stearic acid as a process control agent. The X-ray diffraction results indicated that Al82Fe16Nb2 achieved a β-phase solid solution with 13–14 nm crystallite sizes after 5 h of milling, reaching an amorphous state after 10 h. In contrast, Al82Fe14Nb2Mn2 formed a partially amorphous structure within 10 h, with enhanced stability with additional milling. Magnetic measurements indicated that both alloys possessed soft magnetic behavior under shorter milling times (1–5 h) and transitioned to hard magnetic behavior as amorphization progressed. This phenomenon was associated with a decrease in saturation magnetization (Ms) and an increase in coercivity (Hc) due to structural disorder and residual stresses. Thermal stability analyses on 10 h milled samples conducted via differential scanning calorimetry showed exothermic peaks between 300 and 800 °C, corresponding to phase transformations upon heating. Post-annealing analyses at 550 °C demonstrated the presence of phases including Al, β-phase solid solutions, Al13Fe4, and residual amorphous regions. At 600 °C, the Al3Nb phase emerged as the β-phase, and the amorphous content decreased, while annealing at 700 °C fully decomposed the amorphous phases into stable crystalline forms. Microstructural analyses demonstrated a consistent reduction in and homogenization of particle sizes, with particles decreasing to 1–3 μm in diameter after 10 h. Altogether, these findings highlight MA's effectiveness in tuning the microstructure and magnetic properties of Al–Fe–Nb (Mn) alloys, making these materials suitable for applications requiring a high thermal stability and tailored magnetic responses.

Formation of Nanocrystalline Fcc Phase by Mechanically Driven Crystallization

Amorphization in the AlC System by Mechanical Alloying

Superstructure in nano-crystalline Al50Cu28Fe22 alloy

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Preparation of Nb3al by High-Energy Ball Milling and Superconductivity

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Phase Transformation and Morphology Evolution of Ti50Cu25Ni20Sn5 during Mechanical Milling

Effect of Milling Parameters on the Development of a Nanostructured FCC–TiNb15Mn Alloy via High-Energy Ball Milling

Preparation of ti-al based nanophase composite powder by mechanical alloying

Phase Transformation of Niti Shape Memory Alloy Powders Prepared by Ball Milling

The structure and property characteristics of amorphous/nanocrystalline silicon produced by ball milling

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Nanocrystalline/Amorphous Tuning of Al–Fe–Nb (Mn) Alloy Powders Produced via High-Energy Ball Milling

A study of nanocrystalline cobalt prepared by ball milling

Nanocrystalline metals prepared by high-energy ball milling

Formation of AlCuFe icosahedral quasicrystal by mechanical alloying: XAFS and XRD studies

Metastable transformation and reordering of mult-phase Al3Ti-based intermetallics

Mechanical Alloying, Fine Structure and Thermal Decomposition of Nanocrystalline Fcc-Fe60cu40

Structural and thermal properties of the Fe-based alloys prepared by mechanical milling

Effects of interfacial interactions between metal and process control agents during ball milling on the microstructure of the milled Fe-based nanocrystalline alloy powder