Abstract:This study investigated the phase transformations and magnetic properties of Ni-Mn-Ga alloy powders prepared by dry ball milling in argon atmosphere. The Fe and Cr elements were found to be introduced in the alloy after ball milling, which should result from the severe collision and friction among the particles, balls, and vial. The x-ray diffraction result indicated that the Fe and Cr elements should have alloyed with the Ni-Mn-Ga matrix. The martensitic transformation temperature and Curie temperature of the 800 °C annealed powders decreased by ~33 °C and increased by ~28 °C, respectively, as compared to that of the bulk alloy. The comprehensive effect of the changing of valence electron concentration of the alloy due to the introduction of Fe and Cr and the grain refinement of the alloy caused by ball milling should be responsible for the reduction of martensitic transformation temperature. The saturation magnetization of the 800 °C annealed powders became larger (~5 emu/g) than that of the bulk alloy. The enhancement of magnetic properties, such as the increase of Curie temperature and enhancement of saturation magnetization of the annealed Ni-Mn-Ga powders, should be attributed to the increase of magnetic exchange caused by introduction of Fe in the alloy. The contaminations of Fe and Cr elements emerging from the dry ball milling process changed the phase transformation and magnetic properties of the Ni-Mn-Ga alloy. Therefore, the dry ball milling process is difficult to control the contamination from the milling medium and not suitable to prepare Ni-Mn-Ga powders. On the contrary, the wet ball milling method under liquid medium should be a better method to prevent the contamination and fabricate pure Ni-Mn-Ga ferromagnetic shape memory alloy powders.

A study of nanocrystalline cobalt prepared by ball milling

Formation of Nanocrystalline Fcc Phase by Mechanically Driven Crystallization

High coercivity induced by mechanical milling in cobalt ferrite powders

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Nanocrystalline metals prepared by high-energy ball milling

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Amorphization in the AlC System by Mechanical Alloying

Solidification Dynamics and Microstructure Evolution in Nanocrystalline Cobalt

Production of nanocrystalline powders by high-energy ball milling: model and experiment

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Effect of free energy on the solid solubility and magnetic behaviour of a mechanically alloyed nanocrystalline Cu–Co–Ti alloy

Effect of Milling Parameters on the Development of a Nanostructured FCC–TiNb15Mn Alloy via High-Energy Ball Milling

On the remarkable thermal stability of nanocrystalline cobalt via alloying

Spark Plasma Sintering Cobalt Base Superalloy Strengthened by Y–Cr–O Compound Through High-Energy Milling

Fabrication of ultrafine and nanocrystalline WC–Co mixtures by planetary milling and subsequent consolidations

Structural and thermal properties of the Fe-based alloys prepared by mechanical milling

Investigation on electrochemical corrosion behavior and mechanical properties of Fe-nano particles produced by high-energy ball milling technique

Phase Transformation and Magnetic Property of Ni-Mn-Ga Powders Prepared by Dry Ball Milling

Superstructure in nano-crystalline Al50Cu28Fe22 alloy

Effect of milling time on the structural, microstructure, and magnetic properties of nanocrystalline Fe90Sb10 powders obtained by high-energy ball milling