Abstract:Anomalous structural evolution was induced by room-temperature 200 keV xenon ion irradiation and it results in the formation of various new metastable phases in the equilibrium immiscible Fe–Cu system. First, nanosized quasicrystals were formed in an amorphous matrix through a two-step transition of crystal to amorphous to quasicrystal in Fe70Cu30 multilayered films. The real compositions of the amorphous matrix and quasicrystals were determined to be close to Fe70Cu30 and Fe50Cu50, respectively. Moreover, the same icosahedral phase was also obtained in another similarly designed Fe50Cu50 multilayered sample upon 850 °C thermal annealing, confirming the existence of such a metastable state. Second, amorphous alloys were formed in a composition range of 30–50 at. % of Cu. Third, a Cu-based face-centered-cubic (fcc) solid solution was formed at an alloy composition of about Fe30Cu70 and, interestingly, another fcc structured metastable crystalline phase was obtained at a composition very close to that of Fe50Cu50. A Gibbs free energy diagram of the Fe–Cu system was calculated, with special consideration of excess interfacial free energy stored in the multilayered films, within the framework of Miedema’s model and it gives a reasonable thermodynamic explanation to the metastable phase formation observed. The amorphous-to-quasicrystal transition is also discussed in terms of the similarity in the atomic configuration between the icosahedral and amorphous short-range orders. Furthermore, molecular dynamics study showed that Fe and Cu could be mixed on an atomic scale in the metastable phases observed.

Irradiation-induced Alloying in an Immiscible TaTi System

Metastable alloys synthesized by ion mixing in immiscible Ti–Nb and Ti–Ta systems

Irradiation-induced Alloying in Immiscible Mo–Cu System Through Multilayer Technique

Ion Mixing to Synthesize Amorphous and Metastable Crystalline Alloys in the Fe-Ta System

Structural phase transition in the Fe–Ta system studied by ion beam mixing

Amorphous phase formation in the Ni–Ti–Ta system studied by thermodynamic calculation and ion beam mixing

Interface Enhanced Glass Forming Ability under Ion Mixing/solid-State Reaction in an Immiscible Hf - Ta System

Unusual Alloying Behavior Observed in the Immiscible AgMo and AgNb Systems under Ion Irradiation

Non-equilibrium Alloy Phase Formation and Transformation Driven by Ion Beam Mixing in the Fe-Hf-Nb Multilayers

Formation of Non-Equilibrium Phases and Associated Structural Transition in the Pd-Ta System Induced by Ion Beam Mixing

Chemical and interface effects on glass forming ability under ion mixing in ZrTa system of positive heat of formation

Formation and Structural Transformation of the Nonequilibrium Phases in the Ru–Ta System Induced by Ion Beam Mixing

Formation of Nonequilibrium Phases and Associated Structural Transitions in the Rh–Ta System Induced by Ion Beam Mixing

Glass forming abilities of the Fe–Ta–(Zr, Ti) alloys studied by thermodynamic calculation and ion beam mixing

Non-equilibrium Alloy Formation in the Ag–Zr System by Ion Beam Mixing

Irradiation induced non-equilibrium phase formation and structural transformation in the Fe–Ti–Nb multilayered films

Metastable Phases Induced by Ion Irradiation in the Equilibrium Immiscible Fe–Cu System

Interface-Driven Solid-State Alloying in an Immiscible Cu-W System

Study of metastable alloy formation by thermodynamic calculation and ion beam manipulation in an equilibrium immiscible Au–W system

A comparative study of metastable alloy formation by ion mixing and thermal annealing of multilayers in the immiscible Y–Zr system

Nonequilibrium Alloy Formation In The Immiscible Cu-Mo System Studied By Thermodynamic Calculation And Ion Beam Mixing