Abstract:For the research on real-time accurate testing technology for the explosion point spatial coordinate of munitions, its currently commonly used methods such as acoustic–electric detection or high-speed imaging are limited by the field conditions, response rate, cost, and other factors. In this paper, a method of spatial coordinate testing for the explosion point based on a 2D PSD (position-sensitive detector) intersection is proposed, which has the advantages of a faster response, better real-time performance, and a lower cost. Firstly, a mathematical model of the spatial coordinate testing system was constructed, and an error propagation model for structural parameters was developed. The influence of the position of the optical axes' intersection as well as the azimuth angle and pitch angle on the test accuracy of the system was simulated and analyzed, thus obtaining the distribution and variation trend of the overall error propagation coefficient of the system. Finally, experiments were designed to obtain the test error of the system for validation. The results show that the system test accuracy is high when the azimuth angle is 20°–50°, the overall error propagation coefficient does not exceed 48.80, and the average test error is 56.17 mm. When the pitch angle is −2.5°–2.5°, the system has a higher test accuracy, with the overall error propagation coefficient not exceeding 44.82, and the average test error is 41.87 mm. The test accuracy of the system is higher when the position of the optical axes' intersection is chosen to make sure that explosion points fall in the region of the negative half-axis of the Zw-axis of the world coordinate system, with an overall error propagation coefficient of less than 44.78 and an average test error of 73.38 mm. It is shown that a reasonable selection of system structure parameters can significantly improve the system test accuracy and optimize the system deployment mode under the long-distance field conditions so as to improve the deployment efficiency.

The Application Of Psd In The Collimation Testing

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Research on the 1D PSD

Research of the Testing System of Characteristics of Electrical Vibration Table Based on PSD

Testing System of Characteristics of Electrical Vibration Table

High-precision Detection Method for an Object Edge Based on a Position-Sensitive Detector

Three-dimensional Dynamic Non-Contact Attitude Detection System Based on Optical Path Deflection Technology

Research on the performance parameter of 2D position sensitive detector

Application of Position Sensitive Detector in Tilted Angle Measuement

Study of Rotation Axis Measurement System Based on PSD

Performance Parameter of 2D Position Sensitive Detector

Spherical Optical Surface Defects Digitizing Evaluation System

Infrared active position sensitive device range finding system

Non-Contact Inspection for Inner Surface of Small-Diameter Pipes Based on Laser-Psd

High-Precision Measurement Method for Small Angles Based on the Defect Spot Mode of the Position-Sensitive Detector

Analysis of Long-Distance Geometric Error Measurement and Uncertainty Based on PSD Laser Collimation Principle

Research Based on QPD Single-lens Micro-angle Measurement System and Its Key Technology

Method for Mitigating Background Light Influence on PSD By Modulating Light Source in Space Payloads

Application of PSD Technology on Bridge Structure Displacement Measurement

Error Analysis and Optimization of Structural Parameters of Spatial Coordinate Testing System Based on Position-Sensitive Detector