Abstract:This article presents the optimization of system design and calibration algorithm for light detection and ranging (LiDAR) imager based on the single-photon avalanche diode (SPAD) image sensor. The supply voltage and the gating high-voltage driving circuit of the SPAD are optimized based on the theoretical analysis and experimental data to improve the trigger times of the SPAD for the laser echo. The real-time calibration algorithm is realized in a field-programmable gate array (FPGA) to obtain the flight time and improve the measurement reliability. A 10-bit time- and area-efficient shifted interframe multievent histogram and a bubbling-based peak detection algorithm are used to calculate flight time, which requires the memory as low as 16 times smaller than storing complete histogram if the pixel values are coded on up to 10 bits and can detect up to four different targets simultaneously without increasing the measurement time. The performance of different kinds of background noise measurement methods is analyzed based on experimental data, which shows that the measurement results are more accurate with the increase of time-to-digital converter (TDC) event detection ability. The proposed crosstalk suppression algorithm based on the LiDAR transmission function can reduce optical crosstalk between adjacent pixels to improve the measurement reliability of the LiDAR imager. The LiDAR imager is presented as capable of measuring a 10-m range with 70-Klux background noise and a $30^{\circ } \times 45^{\circ }$ field of view.

Method for Mitigating Background Light Influence on PSD By Modulating Light Source in Space Payloads

Research on the 1D PSD

Research on the performance parameter of 2D position sensitive detector

Optimization of System Design and Calibration Algorithm for SPAD-Based LiDAR Imager

Resolution Improvement of One-Dimensional Comb-Type PSD by Subdivision

Anti Light Disturbance Analysis of the Measurement of High Precision micro Displacement

Performance Parameter of 2D Position Sensitive Detector

Light disturbance to position sensitive detectors - pattern and method to overcome it

A Method for Measurement of Multiple Light Spot Positions on One Position-Sensitive Detector (Psd)

Position Measurements of Multiple Light Beams with One Position-Sensitive Detector (PSD)

Light-addressable potentiometric sensor based on precise light intensity modulation for eliminating measurement error caused by light source

Design of precision light intensity modulation for light-addressable potentiometric sensor

Modeling of PSD based on Schottky-barrier junction

Position Detection Improvement of Position Sensitive Detector (PSD) by Using Analog and Digital Signal Processing

Development of a New Signal Processor for Tetralateral Position Sensitive Detector Based on Single-Chip Microcomputer

Design and Performance Analysis of Laser Displacement Sensor Based on Position Sensitive Detector (Psd)

Analysis And Adjustment Of Positioning Error Of Psd System For Mobile Sof-Ftir

A Dual-Frequency Online PMP Method with Phase-Shifting Parallel to Moving Direction of Measured Object

Research on High Precision 3D Measurement Detector Using PSD

Displacement measurement system based on phase-sensitive detection and position sensitive detector

Development of A Psd-Based Photon Beam Position Measurement System