Abstract:Fcc‐TixAl1–xN (TiAlN) coatings synthesized via chemical vapor deposition (CVD) reduce cutting tool wear. Although CVD conditions reportedly influence coating quality, no quantitative guidelines are yet available. To quantitatively study the film‐forming mechanism of TiAlN CVD, the gas composition over the surface must be known. Therefore, we developed a gas‐phase elementary reaction model for TiAlN CVD derived from TiCl4/AlCl3/NH3. First, we constructed a novel thermodynamic dataset including molecules that contained both Ti and Al, and calculated the equilibrium composition. Thermal equilibrium calculations in the gas phase showed that the most stable species were AlCl3 and TiCl3 rather than TiCl4. An elementary reaction model was constructed based on the kinetics of the gas‐phase species that were generated. Kinetic analysis revealed that gas‐phase reactions were largely absent under our reactor conditions. The thermal equilibrium calculations indicated that TiCl4 may have given rise to TiCl3. Thus, other reaction pathways of TiCl4 to TiCl3 were explored. We calculated the reaction rate constants of 12 reactions of Ti species and added them to the model, which revealed that TiCl4 decomposed to TiCl3 via TiCl3NH2. Under our conditions, TiCl4 and TiCl3NH2 are the major Ti species and AlCl3 and AlCl2NH2 are the major Al species, which suggests that some of these species may form films. Unlike in the earlier reaction model, NH2 and H radicals were produced, which may have contributed to the surface reactions. For reactors with large Surface/Volume ratio of reactor, the effects of gas‐phase reactions should be considered. Our reaction model enables estimation of the partial pressures of reactor gas species and will therefore aid study of the TiAlN deposition mechanism.

A technical design and experiment of the chemical vapor deposition of AIN film

Preparation of AIN Thin Film by DC Sputtering on SiO2/Si and Analysis of Microstructure

Review on Deposition of C-Axis Oriented AlN Films by Reactive Magnetron Sputtering

Study on the mechanism of aluminum nitride synthesis by chemical vapor deposition

Rate-limiting process and growth kinetics of AlN thin films by microwave plasma CVD with AlBr3-NH3-N2 system

Deposition of AIN Thin Films on Silicon by DC Magnetron Reactive Sputtering

Thermodynamic and kinetic analyses of vacuum synthesis of AlN by the alumina carbothermal reduction nitridation method

Ab initio and experimental study on the mechanism of Al4C3 nitridation in vacuum to prepare AlN

Surface chemistry in atomic layer deposition of AlN thin films from Al(CH3)3 and NH3 studied by mass spectrometry

Preparation and Properties of C-axis Preferred Orientation AlN Thin Films by Pure Nitrogen Reactive Sputtering

Preparation of Aln Films by Pulsed Laser Deposition Using Sintered Aluminum Nitride and Elemental Aluminum As Raw Materials

A study of sputtering process for nanocrystalline FeAlN soft magnetic thin films

A Study of AlN Films Prepared by Arc Ion Plating

Preparing aluminum nitride thin film by atomic layer deposition

Structural and surface analysis of chemical vapor deposited boron doped aluminum nitride thin film on aluminum substrates

Theoretical study on gas‐phase reactions during chemical vapor deposition of TixAl1–xN from TiCl4, AlCl3, and NH3

Low-temperature Synthesis of AlN Films Through Electron Cyclotron Resonance Plasma-Aided Reactive Pulsed Laser Deposition

Synthesis of diamond film on AlN substrate by PCVD

Effect of flux rate on the growth of AlN films on sapphire by MNVPE

AlN Thin Films Grown on Different Substrates by Metal Nitride Vapor Phase Epitaxy

Controllable Synthesis of One-Dimensional Aluminum Nitride Nanostructures Through Vapor-Solid Epitaxial Growth