Abstract:Introduction Recently, some research results have shown the nano-sized LiFePO4 materials have good C-rate performance and low temperature performance. The preparation methods which are easily controlling size and morphology, large scale and lower cost for the nano-sized precursory such as FePO4, Li2CO3, and LiFePO4 materials become the research issues. These are also the bases of nano LiFePO4 materials vast application. Experimental High gravity technology, also called Higee technology, carried out in a rotating packed bed (RPB) reactor, was originally invented in 1979 for the separation processes. The technology was also employed to synthesize various kinds of nano materials in liquidliquid, gas-liquid and gas-liquid-solid reactant systems. Compared with the conventional precipitation process which carried out in stirred tanks or column reactors, the High gravity technology can guarantee the quality of the products and control the morphology, size and size distribution of the particles due to the presence of a sharp supersaturation interface accompanied by the very short liquid residence time in the RPB. In this paper, nano-sized FePO4 particles were synthesized in the RPB reactor as Fig.1. The preparation reactions can be written as: Fe(NO3)3(l)+H3PO4(l)→FePO4(s) + 3HNO3(l) Fe(NO3)3 and H3PO4 liquid reactants are pumped into RPB simultaneously. Meanwhile, NH3·H2O was also fed into the reactor to adjust the pH of the reaction. Both of solutions enter the packed section of RPB through two separate liquid distributors, vigorously mixing and reacting in the packing to form a mixing solution with FePO4·2H2O particles via a outlet into the products tank. The result production was then separated, washed and dried to obtain the spherical FePO4·2H2O powders. Nano FePO4 was prepared by heating FePO4·2H2O at 400°C for 6h in air. Results and Discussion The particle size of FePO4 materials is range from 5nm to 60nm by controlling the appropriate reaction parameters. Typical TEM micrographs of nano-sized FePO4 are illustrated in Fig.2. These nanoparticles exhibit uniform particle size distribution and good dispersion. The performance of nano LiFePO4 prepared the nano FePO4 are investigating.

Agglomeration of Fepo4 Prepared by Continuous Reaction Precipitation

Influence of Different Preparation Methods on Crystallisation and Morphology of Fe2o3 Nanoparticles

Agglomeration-size Model of Ferric Phosphate Spherical Particle Prepared by Controlled Crystallization

Controllable Synthesis of (nh4)fe2(po4)2(oh)·2h2o Using Two-Step Route: Ultrasonic-intensified Impinging Stream Pre-Treatment Followed by Hydrothermal Treatment.

Preparation of FePO4 Nano-Particles by Coupling Fast Precipitation in Membrane Dispersion Microcontactor and Hydrothermal Treatment

Controllable Synthesis of Hierarchical Micro/nano Structured FePO4 Particles under Synergistic Effects of Ultrasound Irradiation and Impinging Stream

Size Adjustment of Iron Phosphate Nanoparticles by Using Mixed Acids

Rapid Synthesis of LiFePO4 by Coprecipitation

Study on Precipitation Processes and Phase Transformation Kinetics of Iron Phosphate Dihydrate

Synthesis Of Fepo4 Center Dot Xh(2)O For Fabricating Submicrometer Structured Lifepo4/C By A Co-Precipitation Method

Synthesis of Nano FePO4 in Novel Rotating Packed Bed Reactor

LiFePO4 Crystal Growth During Co-precipitation

Direct Precipitation for a Continuous Synthesis of Nanoiron Phosphate with High Purity

Synthesis of Fe3O4 Nanoparticles by Co-precipitation and Micro-reactor Method

Reaction Mechanism of Synthesizing LiFePO4/C Using Fe2O3 as Raw Material

Preparation of Spherical NH4FePO4

Revealing the Crystal Phases of Primary Particles Formed During the Coprecipitation of Iron Oxides.

Morphology Control of Sr5(PO4)3F Nanoparticles Synthesized Through Co-Precipitation

Synthesis of Nano-sized LiFePO4/C Coated Powder by Chemical Co-Precipitation Method

Synthesis of FePO4·xH2O for Fabricating Submicrometer Structured LiFePO4/C by a Co-Precipitation Method

A versatile method for preparing FePO4 and study on its electrode performance in lithium ion batteries