Abstract:The olivine LiFePO4 with various morphologies and different growth lattice planes was prepared by a controllable hydrothermal method with changing precursor concentration and using phytic acid as phosphorus source. The microstructure, crystal orientation and electrochemical performance of the prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) and charge–discharge tests. The results show that the morphologies of all samples change from spindle-like to hierarchical plate-like and then to long plate-like shape, and the main exposed facets transform from (100) to (001). This indicates that the precursor concentration and phytic acid play important roles in exposing facets and controlling the morphology of LiFePO4. In order to illustrate these phenomena, a reasonable assembly process is provided and the formation is explained. Li ion diffusion coefficient along [100] and [001] directions was calculated by using electrochemical impedance spectroscopy (EIS). The results show that the diffusion coefficient of (100) facet is higher than that of (001) facet, indicating a good electrochemical performance for (100) facet. In addition, the capacity test is carried out, which also confirms the above results. With the precursor concentration of 0.5[Formula: see text]M, the obtained LiFePO4 with self-assembled hierarchical structure, smaller size and (100) facet shows the best electrochemical performance: 162.1[Formula: see text]mAh/g at 0.1[Formula: see text]C and 112.4[Formula: see text]mAh/g at 10[Formula: see text]C. Using phytic acid as phosphorus source and controlling precursor concentration to prepare high performance LiFePO4 open up a new prospect for the production of cathode materials for lithium ion batteries.

Agglomeration-size Model of Ferric Phosphate Spherical Particle Prepared by Controlled Crystallization

Understanding the Conversion Mechanism and Performance of Monodisperse FeF2 Nanocrystal Cathodes

Agglomeration of Fepo4 Prepared by Continuous Reaction Precipitation

Reaction Heterogeneity in LiFePO4 Agglomerates and the Role of Intercalation-Induced Stress

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

Effect of Spherical Particle Size on the Electrochemical Properties of Lithium Iron Phosphate

Preparation of Ferrous Oxalate As a Lithium-Ion Battery Precursor: Photochemical Reduction-Crystallization

Synthesis of Size-controllable LiFePO<sub>4</sub>/C Cathode Material by Controlled Crystallization

Preparation and Electrochemical Performance of Spherical LiFePO4

Size and morphology controlled polyol synthesis of LiFePO 4 nanoparticles with addition of organic acid combinations

Preparation of Nano-spherical Iron Phosphate by Hydrothermal Method and Its Application as the Precursor of Lithium Iron Phosphate

Controlled Crystallization Synthesis of Porous FePO4·3H2O Micro-Spheres for Fabricating High Performance LiFePO4/C Cathode Materials

Preparation and characterization of high density spherical Li {sub 0.97} Cr {sub 0.01} FePO {sub 4}/C cathode material for lithium ion batteries

Effect of Morphology of Iron Phosphate Precursors on the Electrochemical Performance of Lithium Iron Phosphate

Preparation and Characterization of High-Density Spherical Li0.97Cr0.01FePO4/C Cathode Material for Lithium Ion Batteries

Concentration-Controlled and Phytic Acid-Assisted Synthesis of Self-Assembled LiFePO4 As Cathode Materials for Lithium-Ion Battery

Influence Mechanism of Precursor Crystallinity on Electrochemical Performance of LiFePO4/C Cathode Material

Preparation of Spherical NH4FePO4

Size Adjustment of Iron Phosphate Nanoparticles by Using Mixed Acids

Size and shape control of LiFePO4 nanocrystals for better lithium ion battery cathode materials

Effect of Ph-Dependent Intermediate on the Performance of Lifepo4/C Cathode Material