Abstract:LiFePO4 is the new generation cathode material for lithium ion batteries. To improve the powders’ pile density is considered as the important researching direction. One effective way is to prepare powders composed of spherical particles. Spherical amorphous FePO4·xH2O powders were synthesized by controlled crystallization method, using Fe(NO3)3, H3PO4 and NH3 as the raw materials. The FePO4·xH2O powders were pre-heat treated at 520°C for 20h in air to obtain spherical hexagonal FePO4 powders. The FePO4 powders were homogeneously mixed with Li2CO3, Cr(NO3)3 and sucrose with certain molar ratios, and then sintered at 800°C for 16h in N2. The spherical olivine Li0.97Cr0.01FePO4/C powders were finally obtained through carbothermal reduction process. The composition, structure, morphology, and physicochemical properties of FePO4·xH2O, FePO4 and Li0.97Cr0.01FePO4/C powders were characterized in detail by DTA/TGA, ICP, XRD, SEM, XPS, laser particle size analysis, and tap-density testing. It is observed the tap-density of the spherical Li0.97Cr0.01FePO4/C powders is as high as 1.8gcm−3, which is remarkably higher than the non-spherical LiFePO4 powders reported. At current of 0.005, 0.05, 0.1, 0.25 and 1.0C, the composite cathode materials have initial discharge specific capacity of 163, 151, 142, 131 and 110mAhg−1, respectively. The material also shows excellent cycling performance. The high-density spherical Li0.97Cr0.01FePO4/C cathode material can be used in the lithium ion batteries to greatly increase the batteries’ energy density. To further improve the material's pile density and rate capability is considered as the researching direction.

Preparation and characterization of high density spherical Li {sub 0.97} Cr {sub 0.01} FePO {sub 4}/C cathode material for lithium ion batteries

Preparation and Characterization of High-Density Spherical Li0.97Cr0.01FePO4/C Cathode Material for Lithium Ion Batteries

Preparation and Characteristic of High-Density Spherical LiFePO4

Preparation of Spherical Fepo4 Cathode Material for Lithium Ion Batteries

Controlled Crystallization Synthesis of Porous FePO4·3H2O Micro-Spheres for Fabricating High Performance LiFePO4/C Cathode Materials

Preparation and Characterization of High-Density Spherical Licoo2 Cathode Material for Lithium Ion Batteries

Preparation of Spherical Nanocrystal LiFePO4 and Li4Ti5O12 and Investigation of the LiFePO4/Li4Ti5O12 Cell

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

Preparation of Spherical Nanocrystal LiFePO<SUB>4</SUB> and Li<SUB>4</SUB>Ti<SUB>5</SUB>O<SUB>12</SUB> and Investigation of the LiFePO<SUB>4</SUB>/Li<SUB>4</SUB>Ti<SUB>5</SUB>O<SUB>12</SUB> Cell

Preparation and Characterization of High-Density Spherical LiCoO_2

Preparation and Characterization of High-Density Spherical LiNi0.8Co0.2O2 Cathode Material for Lithium Secondary Batteries

Preparation and Characterization of Spherical Li3v2 (po4)(3)/c Cathode Material for Lithium-Ion Batteries

Preparation and Characterization of Porous Spherical Li_4Ti_5O_(12)/C Anode Material for Lithium Ion Batteries

Controlled Preparation and Characterization of Spherical Lini0.5mn1.5o4 Cathode Material for Lithium-Ion Batteries

Synthesis of Nano-Sized FePO4 Cathode Material via a Microemulsion Technique

Preparation and Characterization of High-Density Spherical LiNi0.8Co0.2O2

Nano-/Microhierarchical-Structured LiMn0.85Fe0.15PO4 Cathode Material for Advanced Lithium Ion Battery.

Fabrication of High Tap Density LiFe0.6Mn0.4PO4/C Microspheres by a Double Carbon Coating–spray Drying Method for High Rate Lithium Ion Batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Synthesis of Nano-Sized FePO<sub>4</sub> Cathode Material Via a Microemulsion Technique