Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Rapid Synthesis of LiFePO4 by Coprecipitation

Rapid Synthesis of LiFePO4 by Coprecipitation.

LiFePO4 Crystal Growth During Co-precipitation

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Preparation of LiFePO4 Nanoparticles in Virtue of Triblock Copolymer P123 and Their Application in Li-ion Battery

Synthesis of Nano-sized LiFePO4/C Coated Powder by Chemical Co-Precipitation Method

Synthesis of FePO4·xH2O for Fabricating Submicrometer Structured LiFePO4/C by a Co-Precipitation Method

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesis and Characterization of LiFePO4 by a New Synthetic Route

Synthesis Of Fepo4 Center Dot Xh(2)O For Fabricating Submicrometer Structured Lifepo4/C By A Co-Precipitation Method

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Morphology and Reaction Mechanism of LiFePO4 Prepared by Hydrothermal Synthesis

A synthesis route for lithium iron phosphate prepared by improved coprecipitation

A rapid polyol combustion strategy towards scalable synthesis of nanostructured LiFePO4/C cathodes for Li-ion batteries

LiFePO(4) Nanocrystals: Liquid-Phase Reduction Synthesis and Their Electrochemical Performance.

Environmentally Benign and Scalable Synthesis of LiFePO4 Nanoplates with High Capacity and Excellent Rate Cycling Performance for Lithium Ion Batteries

A simple, cheap soft synthesis routine for LiFePO4 using iron(III) raw material

Synthesis of Nano-Sized FePO4 Cathode Material via a Microemulsion Technique

Novel synthesis of LiFePO4–Li3V2(PO4)3 composite cathode material by aqueous precipitation and lithiation

Preparation and Electrochemical Performance of LiFePO4/C Microspheres by a Facile and Novel Co-Precipitation