Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Electrochemical Synthesis of Mesoporous Fepo4 Nanoparticles for Fabricating High Performance Lifepo4/C Cathode Materials

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Controlled Crystallization Synthesis of Porous Fepo4 Center Dot 3h(2)o Micro-Spheres for Fabricating High Performance Lifepo4/C Cathode Materials

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Novel Synthesis of 3D Mesoporous FePO 4 from Electroflocculation of Iron Filings as a Precursor of High-Performance LiFePO 4 /C Cathode for Lithium-Ion Batteries

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

An inexpensive preparation of unique nano-micro porous LiFePO4 cathode with excellent rate capability for lithium-ion batteries

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance

Synthesis of LiFePO 4 /C Composite Electrode with Enhanced Electrochemical Performance

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Green Fabrication of Sandwich-Like and Dodecahedral C@Fe3O4@C As High-Performance Anode for Lithium-Ion Batteries

Preparation of LiFePO<sub>4</sub>/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Preparation of LiFePO₄/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Preparation of LiFePO4/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Facile Construction of High-Performance Amorphous FePO4/Carbon Nanomaterials As Cathodes of Lithium-Ion Batteries

Mesoporous Fe2O3 nanoparticles as high performance anode materials for lithium-ion batteries

Fabrication and electrochemical properties of LiFePO4/C cathode materials

Ultrafast Fabrication of LiFePO 4 with High Capacity and Superior Rate Cycling Performance for Lithium Ion Batteries

Amorphous FePO4/Carbon Nanotube Cathode Preparation Via in Situ Nanoprecipitation and Coagulation in a Microreactor.

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery