Abstract:With the raise of resolution, optical payloads are becoming increasingly sensitive to satellite jitter. An approach where the entire spacecraft is pointed with great accuracy requires sophisticated and expensive bus design. In an effort to lower the overall cost of space missions that require highly stable line-of-sight pointing, a method of separating the bus and the payload with low frequency isolators is proposed. This isolation system can block the transmission of disturbance and allow relatively large bus motion. However, if the isolator is linear then there is a trade-off between isolation and static deflection as the launch and the on-orbit stage have difference requirements on the isolation frequency. Otherwise, an extra locking system should be appended to protect the payload before getting into orbit, as the STABLE isolation system[1] and the MIM isolation system[2] did. To overcome this limitation, an alternative approach is to design a nonlinear isolator with high-static stiffness during launch and low dynamic stiffness on orbit. Several specially designed nonlinear isolators have achieved low dynamic stiffness with large static load capacity. Virgin[3] considered a structure made from a highly deformed elastic element to achieve a softening spring. Platus[4] exploited the buckling of beams under axial load in a specific configuration to achieve a negative stiffness in combination with a positive stiffness, and hence low-dynamic stiffness. Others have achieved the same by connecting linear springs with positive stiffness in parallel with elements of negative stiffness[5]~[7]. In the present study, a bifunctional isolator has been developed for optical payloads. The isolator have good performance both during launch and on orbit because of its specially designed nonlinear stiffness and damping. The isolator works in a linear part with low stiffness and small damping ratio under the micro-vibration and microgravity on orbit. The transmissibility requirement and the displacement restriction during launch are satisfied by tuning the nonlinear stiffness and damping parameters. A group of sample isolators are designed tested both statically and dynamically.

Study of Piecewise Linear Isolator Mounted on Nonproportional Damped Structures under Liftoff Preload

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Simulation And Design Of Composite Vibration Isolator For Spacecrafts

Response and Performance of A Nonlinear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Shock Excitations

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Parameter design and experimental study of a bifunctional isolator for optical payload protection and stabilization

Two-step Transfer Function Calculation Method and Asymmetrical Piecewise-Linear Vibration Isolator under Gravity

Active Vibration Suppression of Payloads with a Conical Isolator

Parametric Study for Dynamics of Spacecraft with Local Nonlinearities

Performance of a Launch Isolator: Theoretical and Experimental Study

Parameter Design and Experimental Study of a Two State Nonlinear Isolator

Measurement for the Dynamic Character of the Whole-Spacecraft Isolator

Dynamic Isotropy Design and Analysis of a Six-Dof Active Micro-Vibration Isolation Manipulator on Satellites

Analytical Study of Whole Flexible Spacecraft Vibration Isolation

Passive Control Design of Whole-spacecraft Isolators

Design of active vibration isolation system for satellite optical load based on Stewart platform

Analytical study of the low frequency multi-direction isolator with high-static-low-dynamic stiffness struts and spatial pendulum

Performance Analysis of the New Whole-Spacecraft Isolator

Design and Experimental Study of a VCM-Based Stewart Parallel Mechanism Used for Active Vibration Isolation

Hardening And Softening Characteristics Of A Piecewise Linear Isolator Under 1g Gravity