Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Design of active vibration isolation system for satellite optical load based on Stewart platform

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Design and Experimental Study of a VCM-Based Stewart Parallel Mechanism Used for Active Vibration Isolation

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Simulation And Design Of Composite Vibration Isolator For Spacecrafts

Optimal Design of an Acceleration Isotropy-Based Active Vibration Isolation Stewart Platform for Spaceborne Optical Instrument

Comprehensive Parametric Model and Decoupling Design of a Stewart Platform for a Large Spaceborne Optical Load

Simulation and experiment of an active-passive isolator for micro-vibration control of spacecraft

Dynamic Isotropy Design and Analysis of a Six-Dof Active Micro-Vibration Isolation Manipulator on Satellites

Dynamic modeling and experiment of a hybrid passive/active Stewart vibration isolation platform

Investigation on Active Vibration Isolation of A Stewart Platform with Piezoelectric Actuators

Active Vibration Isolation for Stewart Platforms Using Adaptive Backstepping Sliding Mode Control

Active Vibration Isolation Platform with Eight Pneumatic Actuators

Six-degree-of-freedom active vibration isolation using a stewart platform mechanism

Active Vibration Isolation for Stewart Platform Using Backstepping and NFTSM Control

Study of Whole-Satellite Active Vibration Isolation Platform

Method of high precision pointing control for spacecraft system based on the active-passive integrated orthogonal micro-vibration isolation platform

Dynamic modeling and experimental analyses of Stewart platform with flexible hinges

Six degree-of-freedom active vibration control using the Stewart platforms

Dynamic modeling and robust nonlinear control of a six-DOF active micro-vibration isolation manipulator with parameter uncertainties

Dynamics modeling and integrated attitude pointing control of a Stewart platform satellite