Abstract:This paper presents an experimental and theoretical study of surface generation in the ultra-precision grinding of hard and brittle materials. The study takes into account the material properties, the relative vibration between the grinding wheel and the workpiece, the machining parameters and the phase shift of the grinding process. The Taguchi approach is employed to study the influence of machining parameters on the surface quality and shows that the feed speed and rotational speed of the workpiece are key factors. Experiments have been conducted to study individual variables, and the results further show that the feed rate and the cross-feed distance have a significant effect on surface generation. It is found that the spirals around the central area of the workpiece are the primary mechanism for surface generation, which originates from the synchronous relative tool-work vibration. The integral part of the ratio of the rotational speed of the grinding wheel to rotational speed of the workpiece determines the number of spirals and its fractional part controls the spiral geometry. A theoretical model for predicting the single spiral generation has been developed to explain the accumulation of the phase shift and the geometry. The changeable feed speed near the end of grinding is also modelled, revealing the approximate straight lines around one circle in the central region. The simulated results indicate that the theoretical models and the ground surfaces are in close agreement. The scallop-height model is developed to calculate the influence of phase shift on surface quality, and it is found that the phase shift near the medium value can effectively improve surface quality. Finally, a comparison of different surface generation mechanisms in grinding mould steel, tungsten carbide (WC) and reaction bonded silicon carbide (RB-SiC) is made. It is interesting to note that the Spanzipfel effect contributes to the surface generation not only on ductile materials such as mould steel but also on brittle materials such as WC and RB-SiC. The Spanzipfel effect is the most significant in grinding mould steel. For WC and RB-SiC, the ground surface contains both a ductile region and a brittle region in the form of micro-fractures.

Study on Surface Roughness Model and Surface Forming Mechanism of Ceramics in Quick Point Grinding

An Intelligent Prediction of Surface Roughness on Precision Grinding

Study on the Model of Surface Crack Depth in Ceramics Grinding

Experimental Research on the Effect of Grinding Parameters on Ceramic Machined Surface Roughness

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Error Compensation in One-Point Inclined-Axis Nanogrinding Mode for Small Aspheric Mould

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Surface Characteristics and Roughness Prediction of TC4 Titanium Alloy in High Speed Grinding

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Study on the surface formation mechanism and theoretical model of brittle surface roughness in turning machinable ceramics

Surface Roughness Model of Ground 4H-SiC Considering Ductile and Brittle Removal

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy

Analysis, Modeling and Experimental Study of the Normal Contact Stiffness of Rough Surfaces in Grinding

Influence of Thermal-mechanical Coupling of Single Particle on Grinding Surface Roughness

A parametric evaluation model of abrasive interaction for predicting tooth rough surface in spiral bevel gear grinding

Study on morphology reconstruction of SiC ceramics ground by monolayer-patterned grinding wheel considering strain rate effect

Surface Morphology Evolution during Chemical Mechanical Polishing Based on Microscale Material Removal Modeling for Monocrystalline Silicon

Three-dimensional modelling and simulation of vibration marks on surface generation in ultra-precision grinding

Theoretical investigation on the flank milled roughness profile in quasi-homogeneous materials

An experimental and theoretical analysis of surface generation in the ultra-precision grinding of hard and brittle materials

A Micro-contact Model for Rough Surface of Plane Grinding