Abstract:In current five-axis computer numerical control (CNC) machining, the use of minute linear path segments as an approximation for the ideal cutter contacting (CC) point trajectory is still prevalent. However, introducing rotation axes leads to a deviation of the actual CC point trajectory from the ideal, resulting in nonlinear errors. An integrated method is proposed in this paper for compensating and correcting both the contour error, associated with the approximation of the part surface by the ideal CC point trajectory and the nonlinear error of the CC point trajectory based on the information in the CC point data. By analyzing the spatial relationship between the tool posture and the CC point path during the five-axis linear interpolation process, two adjacent machining tool positions containing CC point data information are selected as the starting and ending points of the five-axis linear interpolation machining. The ideal tool center point and the actual CC point are calculated during the interpolation process, as well as the distance and the unit vector in the perpendicular direction between the actual CC point and the ideal CC point trajectory segment. In the comprehensive error compensation and correction phase, the obtained unit vectors are used as direction vectors for error compensation, and the tool center point during interpolation is first compensated and corrected. This ensures the actual CC point and the contour curve are on the same plane. The compensation direction for contour error is calculated using the start/end tool axis vectors and the ideal CC point trajectory vectors. The size of the contour error approximating the contour curve is calculated through the chord error. A second compensation and correction are applied to the tool center point for interpolation, ultimately achieving comprehensive compensation and correction of nonlinear errors. The data calculations were conducted in the MATLAB environment using actual machining data. After compensation and correction, the contour error was reduced by 76%, the nonlinear error of the CC point trajectory decreased to below 0.88 μm, and the comprehensive nonlinear error of the CC point trajectory was reduced from 19 to 1.5 μm, a reduction of 93%. This demonstrates significant practical value in enhancing the accuracy of five-axis CNC machining. Through actual machining verification, after using the method described in this paper, the average surface roughness decreased from 1.133 to 0.220 μm, and the maximum surface roughness decreased from 6.667 to 1.240 μm. This significantly demonstrates that the compensation and correction method proposed in this paper can significantly improve the surface quality of machined parts.

Error Compensation in One-Point Inclined-Axis Nanogrinding Mode for Small Aspheric Mould

Ultra-precision Single-point Grinding Technique and Profile Error Compensation Method for Machining Aspheric Mould

Development of Ultra-Precision Grinding Process for Aspheric Surface Based on Feed Rate Controlling and Error Compensation Methods

One-Point Nano-Grinding for Micro-Aspherical Glass Lens Mould

An error compensation method for single point oblique axis grinding considering the grinding wheel wear

The compensation of geometrical errors on forming grinding

Ultra-precision raster grinding biconical optics with a novel profile error compensation technique based on on-machine measurement and wavelet decomposition

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Geometric error modeling and compensation for five-axis CNC gear profile grinding machine tools

Evaluation on Ground Surface Accuracies of Large-Depth and Steeply Micro-Structured SiC Surfaces

An integrated method for compensating and correcting nonlinear error in five-axis machining utilizing cutter contacting point data

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

An innovative geometric error compensation of the multi-axis CNC machine tools with non-rotary cutters to the accurate worm grinding of spur face gears

Research on Precision Grinding Processing and Compensation Finishing Experiment for Mid-Large- Aperture Square Aspheric Optical Element

Integrated planning for precision machining of complex surfaces—III. Compensation of dimensionai errors

Integration of Metrology in Grinding and Polishing Processes for Rotationally Symmetrical Aspherical Surfaces with Optimized Material Removal Functions

Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface

The development of time-dependent compensation model for roller CVC profile generation in precision grinding

A Normal Section Plane Method for Profile Error Analysis of Five-Axis Machine Tools Based on the Ideal Tool Flank Milling Surface

An iterative optimization algorithm for posture and geometric parameters of grinding wheel based on cross-section sensitivity and matching constraints of solid end mills

Dimensional Accuracy Compensation Method of Large Shaft Grinding Via Residual Error Iteration with Fuzzy Approach