Abstract:Alumina ceramic coatings are widely used because of their favorable physical and chemical stability. However, the formation of stable alpha phase alumina on metallic substrates at lower temperatures still presents technical challenges. In this work, an Cr doped Al2O3 ceramic coating was successfully fabricated on 316L stainless steel by a new cathodic micro-arc deposition (CMAD) technique using Al(NO3)3 as the precursor. We studied the effect of chromium on its phase transition from gamma to alpha as well as the underlying mechanism. Phase and chemical composition distribution, surface morphology, and photoluminescence data were characterized by X-ray diffraction (XRD), electron probe microanalysis (EPMA), a scanning electron microscope (SEM) with an energy dispersive spectroscopy (EDS), and a microscopic confocal Raman spectrometer (MCRS). The results showed that the ceramic coatings have a porous microstructure and were mainly composed of Cr doped α-Al2O3 and γ-Al2O3. This suggests that the introduction of Cr in the electrolyte solution can promote the nucleation and growth of the corundum phase of α-Al2O3. Based on the comparison of conventional heat treatment of alumina precipitates with and without Cr dopant via a sol–gel process, we proposed that the reducing atmosphere and local high sparking temperature that subsequently enhances the diffusion of defects in oxides may be contributed to this transition. This finding might provide a simple, cost efficient way to fabricate corundum alumina coatings on metallic substrates under mild temperatures without sacrifice of its mechanical properties.

Preparation of coatings on alumina ceramic for wettability

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Nickel Coating on Alumina Ceramic Surface by Chemical Vapour Deposition and Its Wettability with Copper

Wetting and Brazing of Chromium Film-Deposited Alumina Using AgCu Filler Metal

Preparation and properties of sol-gel Al_2O_3 coating on carbon steel

Preparation and Properties of Ceramic Coatings by Cathode Plasma Electrolytic Deposition on Titanium Alloy

Preparation and properties of sol-gel Al2O3 coating on carbon steel

Preparation of Al2O3-ZrO2 Composite Ceramic Coating by a New Sol-gel Method and It's Structure

Corrosion Properties of Alumina Coatings on Steel and Aluminum Deposited by Ion Beam Assisted Deposition

Improvement of Structures and Properties of Al2O3 Coating Prepared by Cathode Plasma Electrolytic Deposition by Incorporating SiC Nanoparticles

Direct ink writing of hierarchically porous Al 2 O 3 matrix composites with enhanced wettability of Al

The Effect of Chromium on the Gamma to Alpha Phase Transition of Alumina Coating Formed on 316L SS by a Cathodic Micro Arc Deposition (CMAD) Process

Composition and Mechanical Properties of Hard Ceramic Coating Containing Α-Al2o3 Produced by Microarc Oxidation on Ti–6Al–4V Alloy

Titanium metallization of Si3N4 ceramics by molten salt reaction: coating microstructure and brazing property

Combustion synthesis of Al2O3 ceramic coating and its application

Structure and performance of γ-alumina washcoat deposited by plasma spraying

OBTAINING OF TiN COATING ON CERAMIC PARTICLES AND ITS USE

Fabrication of robust ceramic based superhydrophobic coating on aluminum substrate via plasma electrolytic oxidation and chemical vapor deposition methods

Compound Ceramic Coatings on Ti-6al-4v by Micro-Plasma Oxidation in Naalo2 Solution

Improvement of the Properties of Thermally Sprayed Ceramic Coating by the Infiltration of the Adhesives

Preparation of PEO ceramic coating on Ti alloy and its high temperature oxidation resistance