Abstract:Mesoporous carbon materials with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2,3-dihydroxynaphthalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)(2)center dot 6H(2)O] solution in 2-propanol, which was added to the carbon-silica nanocomposite prior to thermal treatment. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 degrees C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM), and in situ electron diffraction X-ray spectroscopy (EDX). While TG analysis revealed carbon contents lower than 30 wt.-%, nitrogen adsorption provided information about the homogeneity of the carbon thin film deposited onto the mesopore walls of the ordered silica templates SBA-15. The templates, carbon-silica nanocomposites, and carbon inverse replicas with nickel nanoparticles exhibit uniform pores, high surface areas, and large pore volumes. Partially graphitic carbon was identified by the presence of a characteristic G band in the Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD. The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles are uniform in size, ca. 3 nm, and are homogeneously dispersed on the tubular carbon walls. A few larger clusters of nickel, ca. 60 nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles are largely composed of Ni with traces of NiO. Similar nanoparticle dispersions have been reported only for Ni-containing multiwalled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbon materials, CMK-3, possess larger Ni/NiO nanoparticles. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)

A Novel Sol–gel Process to Facilely Synthesize Ni3Fe Nanoalloy Nanoparticles Supported with Carbon and Silica

Synthesis of iron–nickel nanoparticles via a nonaqueous organometallic route

Facile synthesis of nickel nanoparticles supported on carbon and silica matrix via a novel silica sol–gel process

Sol-gel preparation and characterization of NiCo and Ni3Fe nanoalloys

Facile Synthesis of Superparamagnetic Ni-Fe Ultrafine Nanoalloy Nanoparticles with Equilibrium Ordered Phase Structure Via A Sol-Gel Process

Size- and Structure-Controlled Synthesis and Characterization of Nickel Nanoparticles

Chemical Synthesis of Monodisperse Fe-Ni Nanoparticles Via A Diffusion-Based Approach

A simple fabrication of mineral supported Ni-NiAl2O4 nanocomposites with a novel transition layer

A new method to synthesize nickel carbide (Ni3C) nanoparticles in solution

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Phase-controlled Synthesis of Nickel Silicide Nanostructures

A Low Temperature Mechanochemical Synthesis And Characterization Of Amorphous Ni-B Ultrafine Nanoparticles

Fabrication of a novel nickel-nickel aluminate nanocomposite with improved nanoparticle dispersion

Tuning Electronic Structure and Composition of FeNi Nanoalloys for Enhanced Oxygen Evolution Electrocatalysis via a General Synthesis Strategy

Facile fabrication of ultrafine CoNi alloy nanoparticles supported on hexagonal N-doped carbon/Al2O3 nanosheets for efficient protein adsorption and catalysis

Synthesis of nanometer Ni-Zn ferrite powders by sol-gel auto-combustion

Controlled Synthesis of Magnetic Spinel-Type Nickel Ferrite Nanoparticles by the Interface Reaction and Hydrothermal Crystallization

Silicon-Doped Nanostructured Fe80Ni20 Alloys: The Role of Si on the Microstructure, Morphology and Magnetic Properties

Alkaline steaming-assisted conversion: a new strategy for the synthesis of pure NiFe2O4 and CoFe2O4 spinel ferrite nanoparticles

Synthesis Of Nicuzn Ferrite Nano-Sized Particles By Sol-Gel Auto-Combustion

$\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ Alloy Nanoparticles Encapsulated inside Carbon Nanotubes: Controlled Synthesis, Structure and Magnetic Properties