Abstract:In this work, we reported that the fibrous silica nanosphere, also called as KCC-1, was facilely synthesized by the improved microemulsion hydrothermal fabrication strategy. The obtained KCC-1 was investigated as the support of the Ni based catalysts toward CO2 methanation. The obtained catalysts with unique dendrimeric mesopore structure and outstanding structural properties could provide easily accessible as well as highly dispersed Ni nanoparticles to the gaseous reactants. Besides, the Ni based catalysts with commercial SiO2 and MCM-41 as supports were also prepared as the reference catalysts to demonstrate the advantages of the dendrimeric mesoporous channels. Various techniques, such as X-ray powder diffraction (XRD), N-2 physisorption, transmission electron microscopy (TEM), H-2 temperature programmed reduction (H-2-TPR), CO2 temperature programmed desorption (CO2-TPD), X-ray photoelectron spectroscopy (XPS), etc., were used to characterize the catalytic supports and corresponding catalysts. It was found that the metallic Ni nanoparticles could be highly dispersed over the catalysts supported on fibrous KCC-1 with dendrimeric mesoporous channels. Furthermore, the catalytic performances toward CO2 methanation had been further evaluated over these catalysts at different temperatures. It was found that the KCC-1 supported catalyst performed much higher low-temperature catalytic activities than the reference catalysts supported on commercial SiO2 and MCM-41, suggesting that the fibrous and dendrimeric mesoporous channels displayed distinctive advantages by accommodating enough metallic Ni active sites. The kinetic study also revealed that the topology of the mesoporous channel could obviously influence the apparent activation energy in the CO2 methanation reaction. Besides, the temperature programmed surface reaction (TPSR) and in-situ Diffused Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) of the CO2 methanation were also carried out to reveal the possible reaction pathway and mechanism. We also found that the fibrous silica nanosphere (KCC-1) supported catalyst demonstrated much better sintering-proof property of the metallic Ni nanoparticles than the reference catalysts during the 40 h stability tests at 400 degrees C. Therefore, the present fibrous silica nanosphere (KCC-1) could be considered as the promising support for Ni based catalysts toward CO2 methanation.

A simple fabrication of mineral supported Ni-NiAl2O4 nanocomposites with a novel transition layer

Fabrication of a novel nickel-nickel aluminate nanocomposite with improved nanoparticle dispersion

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Formation Combined with Intercalation of Ni and Its Alloy Nanoparticles within Mesoporous Silica for Robust Catalytic Reactions

Confined Synthesis of Amorphous Al2O3 Framework Nanocomposites Based on the Oxygen‐Potential Diagram as Sulfur Hosts for Catalytic Conversion

A Novel Sol–gel Process to Facilely Synthesize Ni3Fe Nanoalloy Nanoparticles Supported with Carbon and Silica

Facile fabrication of ultrafine CoNi alloy nanoparticles supported on hexagonal N-doped carbon/Al2O3 nanosheets for efficient protein adsorption and catalysis

Novel fabrication of a sepiolite supported cobalt-based catalyst via a coprecipitation-reduction method

Constructing Highly Dispersed Ni Based Catalysts Supported on Fibrous Silica Nanosphere for Low-Temperature CO2 Methanation

Facilely Fabricating Highly Dispersed Ni-based Catalysts Supported on Mesoporous MFI Nanosponge for CO2 Methanation

Hierarchical hollow Ni/γ-Al2O3 catalyst derived from flower-like Ni-Al layered double hydroxide with stable catalytic performance for CO2 methanation

Nickel/USY Catalyst Derived from a Layered Double Hydroxide/Zeolite Hybrid Structure with a High Hydrogenation Efficiency

Facile preparation of a Ni/MgAl2O4 catalyst with high surface area: enhancement in activity and stability for CO methanation

Preparation of highly active and hydrothermally stable nickel catalysts.

Catalytic Performance of Iron Oxide Loaded on Electron-Rich Surfaces of Carbon Nitride

Copper and Nickel Selectively Deposited on Hybrid Ceria-Alumina Nanoparticles As Catalysts for CO Oxidation

Porous Hierarchical Nickel Nanostructures and Their Application As a Magnetically Separable Catalyst

A Ni-based Catalyst with Enhanced Ni–support Interaction for Highly Efficient CO Methanation

CO2 Methanation over the Ni-based Catalysts Supported on Nano-Ceo2 with Varied Morphologies

Colloid synthesis of Ni<sub>12</sub>P<sub>5</sub>/N, S-doped graphene as efficient bifunctional catalyst for alkaline hydrogen evolution and triiodide reduction reaction

Preparation and characterization of nickel based catalysts on silica, alumina and titania obtained by sol–gel method