Abstract:The influence of the synthesis method parameters used to prepare nickel-based catalysts on the catalytic performance for the glycerol steam reforming reaction was studied. A series of Al2O3-supported Ni catalysts were synthesized, with nickel loading of 8 wt%, using the incipient wetness, wet impregnation, and modified equilibrium deposition filtration methods. The catalysts' surface and bulk properties were determined by inductively coupled plasma (ICP), N2 adsorption-desorption isotherms (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and temperature-programmed reduction (TPR). Used catalysts were characterized by techniques such as elemental analysis and SEM in order to determine the level of carbon that was deposited and catalyst morphology. The results indicated that the synthesis method affected the textural, structural and surface properties of the catalysts, differentiating the dispersion and the kind of nickel species on alumina's surface. The formation of nickel aluminate phases was confirmed by the XRD and TPR analysis and the β-peak of the Ni/Al-edf catalyst was higher than in the other two catalysts, indicating that the nickel aluminate species of this catalyst were more reducible. Both Ni/Al-wet and Ni/Al-edf catalysts showed increasing CO2 selectivities and approximately constant CO selectivities for temperatures above 550 °C, indicating that these catalysts successfully catalyze the water gas shift reaction. It was also confirmed that the Ni/Al-edf catalyst had the highest values for glycerol to gaseous products conversion, hydrogen yield, allyl alcohol, acetaldehyde, and acetic acid selectivities at 650 °C and the lowest carbon deposition of the catalysts tested. The correlation of the catalysts' structural properties, dispersion and reducibility with catalytic performance reveals that the EDF method can provide catalysts with higher specific surface area and active phase's dispersion, that are easier to reduce, more active and selective to hydrogen production, and more resistant to carbon deposition.

Preparation and characterization of nickel based catalysts on silica, alumina and titania obtained by sol–gel method

Sol-Gel Preparation, Characterization and Hydrogenation Property of Silica Supported Ni Catalyst

Catalytic Performances of Ni/Mesoporous Sio2 Catalysts for Dry Reforming of Methane to Hydrogen

Influence of the synthesis method parameters used to prepare nickel-based catalysts on the catalytic performance for the glycerol steam reforming reaction

Preparation of highly active and hydrothermally stable nickel catalysts.

Preparation of Different Nickel–Iron/Titania–Alumina Catalysts for Hydrogen/Carbon Monoxide Methanation under Atmospheric Pressure

Performance Study of Ni/Si-MCM-41 Catalysts, Synthesized with Different Silica Sources, and their Application on Methane Dry Reform to Produce Green Hydrogen

Preparation and characterization of nickel aluminosilicate nanocomposites for transfer hydrogenation of carbonyl compounds

Impact of preparation method on nickel speciation and methane dry reforming performance of Ni/SiO2 catalysts

A Comparative Study of Ni-Based Catalysts Prepared by Various Sol–Gel Routes

Sol–gel Synthesis of Titanium Oxide Supported Nickel Catalysts for Hydrogen and Carbon Production by Methane Decomposition

Synthesis Chemistry and Properties of Ni Catalysts Fabricated on SiC@Al2O3 Core-Shell Microstructure for Methane Steam Reforming

Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming

Ni-based catalysts supported on MgAl<sub>2</sub>O<sub>4</sub> with different properties for combined steam and CO<sub>2</sub> reforming of methane

Role of Structure and Acidic Nature on Catalytic Behavior of Nickel Supported H-mordenite, H-ZSM-5, and γ–alumina Catalysts

Optimizing Ni dispersion and stability over SiO<sub>2</sub> supported Ni-La<sub>2</sub>O<sub>3</sub> catalysts by preparation method for enhancing H<sub>2</sub> selectivity and durability on steam reforming of methylcyclohexane

Catalytic Performance and Characterization of Neodymium-containing Mesoporous Silica Supported Nickel Catalysts for Methane Reforming to Syngas

Catalytic Behaviors and Stability of Aerogel Silica-Supported Ni Catalysts for the Partial Oxidation of Methane into Synthesis Gas

A Novel Approach to Preparing Highly Porous and Dispersed Supported Nickel Catalyst

Characterization and Analysis of Carbon Deposited on the Surface of Ni/Al_2O_3 Catalyst for Methane Dry Reforming

Study on characterization and application of novel Ni-Ga based catalysts in conversion of carbon dioxide to methanol