Abstract:The Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers were prepared using sol-gel process combined with electrospinning. The thermal decomposition and phase inversion process of precursor nanofibers and the effects of calcination temperature and SiO2 content on the phase composition, microstructure, morphology and magnetic property of the resulting nanofibers were studied by means of thermogravimetric and differential thermal analysis, X-ray diffraction, field emission scanning electron microscopy, high resolution transmission electron microscopy and vibrating sample magnetometer. The experimental results show that the cubic spinel structure is basically formed when the precursor nanofibers are calcined at 450 ℃ for 2 h. The average grain size of Ni0.5Zn0.5Fe2O4 contained in the composite nanofibers with 10 % SiO2 and their specific saturation magnetization and coercivity increase with increasing calcination temperature. Amorphous SiO2 additive can effectively restrain the growth of Ni0.5Zn0.5Fe2O4 nanocrystals. As a result, with SiO2 content increasing from 0 to 20 % , the average grain size of Ni0.5Zn0.5Fe2O4 in the prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers calcined at 900 ℃ for 2 h decreases from 81.6 to 13.3 nm, and the specific saturation magnetization of these samples monotonically decreases, whereas the coercivity initially increases and then decreases due to the change of magnetic domain structure from multi-domain to single-domain along with the reduction in grain size. In addition, with the increase of SiO2 content, the diameter of the as-prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers gradually increases and the surface becomes smooth.

Sol-gel preparation and characterization of NiCo and Ni3Fe nanoalloys

A Novel Sol–gel Process to Facilely Synthesize Ni3Fe Nanoalloy Nanoparticles Supported with Carbon and Silica

Synthesis of iron–nickel nanoparticles via a nonaqueous organometallic route

Facile Synthesis of Superparamagnetic Ni-Fe Ultrafine Nanoalloy Nanoparticles with Equilibrium Ordered Phase Structure Via A Sol-Gel Process

Size- and Structure-Controlled Synthesis and Characterization of Nickel Nanoparticles

Sol-gel synthesis and characterization of foamed Ni 3 Pt alloys

Study of Preparation of Cobalt Aluminate by Sol-Gel Process and Electroless Plating

Sol–gel autocombustion synthesis of Co–Ni alloy powder

Sol-gel Autocombustion Synthesis of Nanocrystalline High-entropy Alloys

Al3+ ions dependent structural and magnetic properties of Co-Ni nano-alloys

Structural, Dielectric, and Electrical Transport Properties of Al3+ Substituted Nanocrystalline Ni-Cu Spinel Ferrites Prepared Through the Sol-Gel Route

Preparation and application of nano-Ni–Co alloy

Exploration of properties (crystallographic, morphological, optical) of nano cobalt aluminate synthesized by facile sol-gel method: Effects of sintering temperature

Nano-alloys Synthesized by Controlled Crystallization from Supercooled Atomic Clusters of Elements

Structural and Magnetic Characterization of Ni-Co Mixed Ferrite Nanopowders Synthesized via Coprecipitation and Sol-Gel Methods

Structural and Magnetic Properties of Ni0.6Zn0.4Fe2O4Ferrite Prepared by Solid State Reaction and Sol-gel

Effect of Ni2+ and Fe3+ Ion Concentrations on Structural, Optical, Magnetic, and Impedance Response of NiFe2O4 Nanoparticles Prepared by Sol-Gel Process

Nanostructure and compositional segregation of soft magnetic FeNi‐based nanocomposites with multiple nanocrystalline phases

Synthesis Of Nicuzn Ferrite Nano-Sized Particles By Sol-Gel Auto-Combustion

Preparation of One-Dimensional Ni0.5 Zn0.5 Fe2O4/SiO2 Composite Nanostructures and Their Magnetic Properties

Preparation and Properties of Fe-Co-Ni Alloy/co0.5ni0.5fe2o4 Magnetic Composite Nanofibers