Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Low Sintering Temperature for Li-, Sb-, and Ta- Modified (K,na)nbo3-Based Ceramics from Nanopowders

Li‐, Sb‐ and Ta‐modified (K, Na)NbO3 Nanopowder Prepared Via a Water‐based Sol–gel Method

Effects of Na Excess on the Preparation and Characterization of (K0.5na0.5)nbo3ceramics

Low-Temperature Sintering and Enhanced Piezoelectric Properties in Knn-Lts Nanopowder Prepared Via A Low-Cost Water-Based Sol-Gel Method

Piezoelectric Properties of Li, Sb, and Ta Co-Doped (k,na)nbo3 Ceramics with Fine Grain Size Sintered by SPS Method

Low temperature sintering and enhanced piezoelectricity of lead-free (Na 0.52 K 0.4425 Li 0.0375)(Nb 0.86 Ta 0.06 Sb 0.08) O 3 ceramics prepared from nano-powders

Properties of Ultrafine-Grained Na0.5K0.5NbO3 Ceramics Prepared from Nanopowder

Dielectric Performance and Conductive Mechanism of KNN-based Ceramics Prepared Via Sol–gel Core–shell Process

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

Sintering Behavior and Electrical Properties of the (li, Ta, Sb) Modified (K, Na)NbO3 Lead-Free Ceramics with KNbO3 As Sintering Aid

(Bi0.5na0.5)(zr0.97w0.01fe0.02)o3 Doping Effects on KNN‐based Lead‐free Ceramics Prepared Via Two‐step Sintering Technique

Low-temperature Sintering of KNN with Excess Alkaline Elements and the Study of Its Ferroelectric Domain Structure

Low-temperature Sintering of (K,na)nbo3-Based Lead-Free Piezoceramics with Addition of LiF

Low-temperature synthesis of K0.5Na0.5NbO3 ceramics in a wide temperature window via cold-sintering assisted sintering method and enhanced electrical properties

A New Sintering Approach to Ceramics at Low Temperature from Ba(Zr X Ti 1- X )O 3 Nanoparticles Doped by ZnO

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

The phase structure and electric properties of low-temperature sintered (K, Na)NbO3-based piezoceramics modified by CuO

The Effects of K/Na Ratio on the Electrical Properties of (Li, Sb, Ta) Modified KNN Piezoelectric Ceramics at Reduced Temperature with KNbO3 as Sintering Aid

Low‐Temperature Sintering of Li‐Modified (K, Na)NbO3 Lead‐Free Ceramics: Sintering Behavior, Microstructure, and Electrical Properties

(K0.44,Na0.52,Li0.04)(Nb0.84,Ta0.10,Sb0.06)O3 ferroelectric ceramics

Sintering temperature effect on microstructure, electrical properties and temperature stability of MnO-modified KNN-based ceramics