Abstract:SiC fiber reinforced SiC ceramic matrix composite is a kind of promising high-temperature structure absorbing integrated material because of its good temperature resistance and high-temperature stability. However, the mechanical properties of the composites are poor and it is difficult to adjust the electromagnetic parameters. In this study, Ti powders were used as active fillers to improve the mechanical and microwave absorption properties of SiCf/SiC composites fabricated by polymer infiltration and pyrolysis (PIP) process. The compositions of SiC matrix derived from polycarbosilane (PCS) precursor modified by various content Ti powders were investigated by XRD and Raman spectroscopy. With the incorporation of Ti powders, free carbon decomposed from PCS was consumed due to the formation of TiC phase. The effect of Ti fillers on the mechanical and dielectric properties of SiC/SiC composites was also investigated. The flexural strength of SiCf/SiC composite was gradually improved with increasing Ti content owing to the improved density and TiC particle strengthening. Besides, consumption of free carbon in SiC matrix may impair the conductive network of free carbon, leading to decreased conductivity and the imaginary part of complex permittivity of the composite. Therefore, an optimum microwave absorption performance of SiCf/SiC composite with an RLm value of − 37 dB at 10.51 GHz and an effective absorption bandwidth of 3.28 GHz was obtained at the thickness of 2.5 mm and the Ti content of 5 wt%. The Ti-filled SiCf/SiC composite with superior microwave absorption property is a promising candidate in the high-temperature structure absorbing field.

Mechanical and dielectric properties of 2.5D SiCf/SiC-Al2O3 composites prepared via precursor infiltration and pyrolysis

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Microwave absorption and mechanical properties of SiCf/SiOC composites with SiO2 fillers

Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis

Mechanical and microwave absorption properties of Ti-filled SiCf/SiC composites via precursor infiltration and pyrolysis

Fabrication of 3D-SiC/aluminum alloy interpenetrating composites by DIW and pressureless infiltration

Influence of polycarbosilane composition on the properties of SiC/SiC composite fabricated by precursor infiltration and pyrolysis process

Microstructure and Mechanical Properties of Unidirectional, Laminated Cf/SiC Composites with α-Al2O3 Nanoparticles as Filler

The Effect of PyC/SiC Compound Interphase on the Properties of PIP SiC/SiC Composite

Effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of high volume fraction SiC/Al composites prepared by a novel hybrid additive manufacturing

Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites

Mechanical Properties and Failure Behavior of 3D-SiCf/SiC Composites with Different Interphases

Fabrication and Mechanical Properties of SiCw(p)/SiC-Si Composites by Liquid Si Infiltration using Pyrolysed Rice Husks and SiC Powders as Precursors

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Effect of chemical vapor infiltration on the flexural properties of C/C-SiC composites prepared by the precursor infiltration pyrolysis method

Preparation and properties of Ti3SiC2 preform reinforced SiC ceramic matrix composites

Strengthening Mechanism and Damping Properties of SiCf/Al-Mg Composites Prepared by Combining Colloidal Dispersion with a Squeeze Melt Infiltration Process

Residual stress and interface debonding behavior in Si3N4w reinforced SiCN composites prepared by the PIP process: A case study

Pressureless Infiltration Preparation of High SiC/Al Ceramic Matrix Composites