Abstract:SiC fiber reinforced SiC ceramic matrix composite is a kind of promising high-temperature structure absorbing integrated material because of its good temperature resistance and high-temperature stability. However, the mechanical properties of the composites are poor and it is difficult to adjust the electromagnetic parameters. In this study, Ti powders were used as active fillers to improve the mechanical and microwave absorption properties of SiCf/SiC composites fabricated by polymer infiltration and pyrolysis (PIP) process. The compositions of SiC matrix derived from polycarbosilane (PCS) precursor modified by various content Ti powders were investigated by XRD and Raman spectroscopy. With the incorporation of Ti powders, free carbon decomposed from PCS was consumed due to the formation of TiC phase. The effect of Ti fillers on the mechanical and dielectric properties of SiC/SiC composites was also investigated. The flexural strength of SiCf/SiC composite was gradually improved with increasing Ti content owing to the improved density and TiC particle strengthening. Besides, consumption of free carbon in SiC matrix may impair the conductive network of free carbon, leading to decreased conductivity and the imaginary part of complex permittivity of the composite. Therefore, an optimum microwave absorption performance of SiCf/SiC composite with an RLm value of − 37 dB at 10.51 GHz and an effective absorption bandwidth of 3.28 GHz was obtained at the thickness of 2.5 mm and the Ti content of 5 wt%. The Ti-filled SiCf/SiC composite with superior microwave absorption property is a promising candidate in the high-temperature structure absorbing field.

Preparation and properties of Ti3SiC2 preform reinforced SiC ceramic matrix composites

Fabrication and Properties of Reaction-Formed SiC by Infiltrating Molten Si into Mesocarbon Microbeads-Based Carbon Preform

Preparation and Properties of SiOC Ceramic Modified Carbon Fiber Needled Felt Preform Composites

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Performance Enhancement in RMI-fabricated SiC-Ti3SiC2 Composites Via Microstructure Optimization

Preparation of Porous SiC Reinforced Metal Matrix Composites

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Mechanical and microwave absorption properties of Ti-filled SiCf/SiC composites via precursor infiltration and pyrolysis

Mechanical, Thermal, and Dielectric Properties of SiCf/SiC Composites Reinforced with Electrospun SiC Fibers by PIP

C/C–SiC Composites Derived from Single‐source Poly(silylene–acetylene) Precursors

Processing of silica bonded porous SiC preform for metallic composites

Fabrication of Co-Continuous SiC/Al Composites from Novel SiC Preforms with High Porosity and Controllable Pore Size

C/C-Sic Composite Fabricated Via Pcs-Si Slurry Reactive Melt Infiltration

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

PREPARATION OF TiC/SiC AND TiN/SiC COMPOSITE CERAMICS FROM LIQUID SILICON INFILTRATION

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering

Mechanical properties and high temperature failure mechanism of carbon fibers reinforced polysilazane-derived SiCN ceramic matrix composites via PIP process

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Fabrication, Microstructure, and Properties of SiC/Al 4 SiC 4 Multiphase Ceramics Via an In-Situ Formed Liquid Phase Sintering

Processing and mechanical performance of 3D Cf/SiCN composites prepared by polymer impregnation and pyrolysis